Finishing: 38mm gap at the end if the bath

[oneilger]

I'm currently completing my first ever attempt at tiling. I've got a gap of 38mm between the end of the bath and the tiled wall. Can anyone suggest how I should complete this part of the job. Thanks

 

[Mike]

I'm currently completing my first ever attempt at tiling. I've got a gap of 38mm between the end of the bath and the tiled wall. Can anyone suggest how I should complete this part of the job. Thanks

If the walls not tiled yet is it possible to board the wall out to meet the bath or 'box' the end and tile it. Are the taps/shower at the other end?

tapatalk on my HTC

 

[Andy Allen]

i would box it in, then tile it.......... is there going to be a shower above it?

 

[nybor62]

box it in , make it at least 100 mm above the bath, nice little shelf aswell

 

[oneilger]

It's at the opposite end from the taps and shower. I have tiled it yesterday but could remove the two tiles concerned

 

[Daveknight]

Definately box in or use a bit of decent timber. You can then tile this or even use some white plastic UPVC trim. Don't forget to Silicon between the bath and this area just in case there is any movement.

 

[Time's Ran Out]

If it's a white bath - use a piece of upvc trim and Silicon it into place.

 

[Ian]

Box it in and tile it. Make a frame and cover it with cement board so if water does get into it, it won't deform.

 

[phil w]

would agree with nybor62, bit of extra time to box in and shelve you'll have to live with it for along time worth the little effort imo

 

[Muse2k8]

If you don't want to remove tiles and box it in a nice bit of sealed timber or trim and silicon should do it 🙂