Fila Colour Intensifier - TilersForums.com

[robbieraven]

Hi Guys,

Just finished a Travertine conservatory floor, looks really good, worked as clean as possible. I sealed it with Fila Honed Tumbled Travertine Protector. Grouted it with Bal Limestone, still looks good but when I cleaned it the second time it just looks so much better when wet. Client observed this too, I went into Topps and they suggested Colour intensifier to give the permanent wet look. I guess it's like wet pebbles on a beach, they look great when the water is on them, collect a few and when they dry they are not quite what they were. I've read that applying it too thick can leave a bad result, is it best to apply with a lint free cloth?

Thanks for any suggestions as always.

R

 

[DHTiling]

Colour intensifier by fila will not give a wet look , you will need a surface/topical sealer for this ...

You can use this for a satin finish >>> http://www.filachim.com/en/products/full-range/waxes/liquid-and-paste-waxes/filasatin.html77

Or this for a shiny finish >>>> Polishing Wax Cleaner | Marble Maintenance | FilaLongLife

But do tell the customer that surface sealers do not last as long as an impregnator..

 

[robbieraven]

Thanks Dave, again You must be permanently on the forum

 

[DHTiling]

Thanks Dave, again You must be permanently on the forum

Nah ... have to boil the kettle sometimes :lol:

 

[charlie1]

I also much prefer the travertine in wet look... Will need to keep this in mind.