Fairy Liquid Spray Bottle

[JohnMar79]

What seems a bit of a stupid question but having watched videos on youtube of people demonstrating the use of washing up liquid in Silicon forming whenever I use an empty bottle of say Dettol etc I get about 3 squirts and then the spray mechanism gives up. Presume this is due to the washing up liquid and seals any recommendations for a bottle that works?

Cheers

 

[Time's Ran Out]

You can pick up a spray bottle for £1 at Lidl.

 

[Flintstone]

eBay there are loads if you can't be arsed to get off the settee

 

[Chalker]

How much detergent are you mixing in?
Doesn't need much. Just a small squirt in a bottle

 

[Flintstone]

I've been trying this method quite a bit recently as I never used to do it, be carefull how you apply the Silicon first as I feel the soapy water can get behind the Silicon in places and stop it sticking to the tile, although it may look smooth and good

 

[JohnMar79]

Yes I'm aware that too much liquid can get behind the Silicon on the wall and stop it sticking long term. Even in low concentrations of washing up liquid say 10% the spray mechanism just gives up. Maybe I have just been unlucky but after three different bottles was beginning to wonder.

 

[Flintstone]

your best bet is just soaping up your profile tool and finger if you use that!

 

[JohnMar79]

Tend to find that leaves too much liquid on the tool or my finger which then makes matters worse. Can see the advantage of a light sprayer keeping things tidy.

 

[Blunt Tool]

Got to find a spray bottle that produces a very fine mist so that you are not soaking Silicon. Hairdressers have good ones but they won't let me in shop as I'm like kojak and bad for business 🙁 so I just had to find by trial and error!

 

[Andy Allen]

I always use a dry finger..