Cutting 20mm Porcelian

[tobins tiling]

Hi I have recently took on a big patio area floor job to be tiled in 20mm thick porcelian and was just wondering if anyone had any tips for cutting these monsters. I have a sigma 3p3m and rubi tx cutters that supposedly cut upto 20mm thick but don't they are going to cut these. Any help would be much appreciated

 

[White Room]

I'd be trying the sigma first, if that don't do it then a grinder or wet cutter.

 

[Spare Tool]

Hi I have recently took on a big patio area floor job to be tiled in 20mm thick porcelian and was just wondering if anyone had any tips for cutting these monsters. I have a sigma 3p3m and rubi tx cutters that supposedly cut upto 20mm thick but don't they are going to cut these. Any help would be much appreciated

@antonio just done one...sigma cut em 😉

 

[tobins tiling]

Thanks for your help lads hopefully the sigma will cut them but I think I'm going to call ats diamond tools and ask them to recommend there best wheel for my bench cutter just in case

 

[Italy]

you have to give. at least 3 steps
600x600?

 

[tobins tiling]

What do you mean Antonio ? The tiles are 600x600 and there are 4 or 5 steps to be done @antonio

 

[Italy]

What do you mean Antonio ? The tiles are 600x600 and there are 4 or 5 steps to be done @antonio

4 / 5 mark /

 

[Italy]

View: https://youtu.be/A9iobx2vD5s

 

[Italy]

View: https://youtu.be/A9iobx2vD5s

same, for porcelain 600x600x20.
I use. grinder for small cuts.
Montolit. having specific blade. I do not proved.
http://www.montolit.com/diamond-blade-turbo-dna_txh/

 

[LM]

What do you mean Antonio ? The tiles are 600x600 and there are 4 or 5 steps to be done @antonio

Tobins, Antonio is Italian and doesn't speak English, he uses google translate.
He means you need to score the tile several times before you attempt to break it, which the sigma should do with ease and if there are cuts that may be too small to break off he's telling you to use a grinder for those