ContractorForum: Invited a few forum members, give us a shout out if you're one of those! I'm hoping the tradesmen will tweet if they don't already. 
More...
Follow us on Twitter.
More...
Follow us on Twitter.
Discuss ContractorForum: Invited a few forum members, give us a shout out if you're one of th in the UK Tiling Forum area at TilersForums.com.
Reply to ContractorForum: Invited a few forum members, give us a shout out if you're one of th in the UK Tiling Forum area at TilersForums.com
There are similar tiling threads here
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper.
A plumber/builder fixed...
- Dawz84
- UK Tiling Forum
- 1
- 913
Hi all.
Just wanting some advice and wondering what the pros in here are using nowadays for cutting large format porc?
Ive been relatively lucky up until recently and been able to cut most of...
- Matthew77
- UK Tiling Forum
- 4
- 927
- Article
123 Year Old Johnson Tiles Factory to Close Down Causing 110 Job Losses
123 Year Old Johnson Tiles Factory to Close Down Causing 110 Job Losses in Stoke On Trent’s Once Thriving Ceramics and...
- Dan
- Tiling News; Tile News
- 9
- 3K
Hi!
I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in preparation for tiling. A couple of days after there's a lot of very fine cracks which have appeared, you...
- po-tay-toes
- UK Tiling Forum
- 5
- 871
Good morning all.
After a little advice. I'll post pictures a bit later. However....
The homeowner of the property I'm working on has just come to me and asked if anything can be done about...
- AliGage
- Tile Cleaning and Restoration Forum
- 6
- 1K