Bullnose / Round Edge on Jura LimeStone - TilersForums.com

[tortoise100]

Hello,

How do I put a bullnose or rounded edge on limestone tiles with an angle grinder ?
Then what would I use to polish the edge ?

Thanks
John

 

[Gazzer]

http://www.tilersforums.com/tiling-tools/67065-r5-half-bullnose-r20-40mm-full.html


http://www.tilersforums.com/tiling-tools/57875-bullnosing-slate.html

http://www.tilersforums.com/tiling-tools/33181-profiling-wheels-bull-nosing-bits.html

 

[Gazzer]

ATS have a great range of polishing pads etc

http://www.ebay.co.uk/sch/Business-Office-Industrial-/12576/i.html?_from=R40&_nkw=ats+diamond

 

[Mr Tiler]

HOW TO MAKE BULLNOSE - ROUND EDGE BLADE STONE MARBLE tile installation atlanta - YouTube

 

[Concrete guy]

Thanks for the links Neale.

Question for the original poster:-

How thick is the product and would you like a full or half bull nose?

For polishing Jura, Silicone carbide pads are ideal. No need to buy diamond pads unless you're doing huge amounts.

 

[tortoise100]

Hello,
The stone is 15 mm thick and I need to make a half bullnose/ half round on each tile.

Thanks
John

 

[Concrete guy]

You'll need one of these, at 10mm or 15mm depending on how large you want the half bullnose:-



Then polish with some silicon carbide pads.

Both fit onto a variable speed grinder/polisher.