Menu
By Country
America Tile Forum
UK Tiling Forum
Canada Tile Forum
Ireland Tiling Forum
Australia Tiling Forum
Forums
Navigation
By Country
GB Tiling Forum
USA Tile Forum
Australia Tile Forum
DIY Tiling
Tiling Courses
Tiling Tools
Tiling News
Pro Tilers Only
Tile Adhesive / Tile Mud
Cutting / Cutters
Tiling on Underfloor Heating
Tanking And Wetrooms
Find Discontinued Tiles
Specialist Tile Advice
Tile Restoration
New posts
Advice Leaflet
Blog
News
Add Your News
What's new
New posts
New media
New media comments
New resources
New profile posts
Latest activity
Media
New media
New comments
Search media
Resources
Latest reviews
Search resources
Members
Current visitors
New profile posts
Log in
Register
What's new
Search
Search
Words:
Navigation
By Country
GB Tiling Forum
USA Tile Forum
Australia Tile Forum
DIY Tiling
Tiling Courses
Tiling Tools
Tiling News
Pro Tilers Only
Tile Adhesive / Tile Mud
Cutting / Cutters
Tiling on Underfloor Heating
Tanking And Wetrooms
Find Discontinued Tiles
Specialist Tile Advice
Tile Restoration
New posts
Advice Leaflet
Menu
Log in
Register
Install the app
Install
Forums
Advice by Country
Canada Tile Advice
Bathroom renovation, Jackoboard and other questions - advice!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Search the forum,
Message
[QUOTE="TheFifthElement, post: 962767, member: 53477"] Thank you for your input and time [USER=42603]@3_fall[/USER] [USER=49421]@Albert[/USER] really appreciated! Just came home with the 4x2 timbers for the stud wall and I am ready to order the boards, tapes and everything else I need. I need some final advice before ordering.... 1) This question is asked probably numerous times but how you secure the washers/boards into 4x2 when you have only 2 inches? The only way i can see that happening is carefully screw the washer between boards (joint) or build the stud wall with the 4" facing the wall horizontaly not verticaly (which is not a big deal - I will have support noggins as I am building recessed shelving). 2) Washers, galvanised any brand ok? 3) I can calculate the different depths I need for screws but which turbogold are compatible with the washers, 4/4.5/5x required mm depth? 4) The other three walls as I have mentioned they are painted over plaster, which I will try to key to death :D Boards will be definitely secured with 15 washers each, with screws deep enough to reach 50mm plugs into the brick wall. I know I should prime my boards for better adhesion but which trowel thickness? Should I prime the roughed up walls as well or is a waste of time and effort? 5) Finally, as the post got really long again, the adhesive...... It would have been really straightforward c2 S1 done.. but inside the airing cupboard we will have a washing machine! So as it is an upstairs bathroom I know even with dampeners we will have some vibration. Should I still go with an S1 or for peace of mind go for S2? And if I use S2 should I use it everywhere or just tiles or boards? (around 40 boards..adhesive..££££) Again thank you all for your time, without the answers I got by reading numerous threads, I wouldn't be thinking to undertake this big project for a DIYer :) George [/QUOTE]
Insert quotes…
Verification
Post reply
Please visit our sponsor websites, they keep the forum free to use!
Advertisement
Share This Page
Facebook
Twitter
Reddit
Pinterest
Tumblr
WhatsApp
Email
Share
Link
Forums
Advice by Country
Canada Tile Advice
Bathroom renovation, Jackoboard and other questions - advice!
Top