bad tiling, help !!! - TilersForums.com

[miagi]

Hi all. just had some 2ft by 1ft bathroom tiles fitted, what a mess!

tiles lipping, he made sure it was only 1mm?

put 2 meter straight edge with 3mm stand off feet at each end, the gap between is 9 to 12 mm,

hence mosaic borders are curved, to fall in line

also tile started above door, but when they went round the room, and met back onthe adjacent wall, the bottom was 10mm lower

company dont want to know, and info please tnx

happy new year??????????????????

 

[Dan]

Welcome to tilersforums.com | Tile Forums | Tiling Forum!

Welcome to tilersforums.com miagi. Thanks for introducing yourself.

 

[Olz]

Hi,

Could you post up some pictures so we can see what were talking about.

Where abouts in the coutry are you?

What has the company said about your concerns?

 

[DHTiling]

:welcome:....who prepped the walls..?

 

[White Room]

He did'nt use a datum line around the room, was any prep done to the walls before tiling, was the tiles laid as a brick bond

 

[david campbell]

:welcome:to the forum

this doesn't sound good,have you paid the company yet?if not don't untill it's rectified,and even if so it's there responsibility to leave a satisfactory job!

 

[miagi]

Hi all tnx for info
no prep , done ,only paid for material, to much of ajob to put right I recon. not coming back, any info on options tnx guys

 

[White Room]

Hold back any monies until your a satisfied customer

 

[doug boardley]

as previously asked, any pics? have you told company about witholding payment for labour? I'm sure they'd sit up and listen then:20:

 

[The Legend; Phil Hobson RIP]

:welcome:Sorry to hear of your problem. As above sounds like walls should have been prepared. Tolerance should be +/- 3mm over 2m edge. As for 10mm out of joint ridiculous. Hope you get it sorted.