Anyone know where can I buy a large pipe collar for a waste to cover a wide gap?

[Gromit1]

I have a problem with an old tiling job, done before I moved in. There is a basin waste pipe in the wall with a collar around it (forgive me if I am not using the right terminology) and the problem is that the hole for the pipe was not cut evenly so there is a gap one side of the collar of perhaps 1cm.

I haven't been able to track down the same tiles, it'd look terrible to fill with grout or Silicon, so I am wondering if there is a large version of a chrome radiator pipe collar on the market?

 

[diamondtiling]

Have a look here mate although I cant visualise what you need. I use them all the time.

McAlpine Plumbing Supplies | Plastic Traps Pipes Wastes Connectors and Fittings

 

[Gazzer]

You may be able to enlargen the hole on a standard chrome radiator pipe collar. The overall diameter of those are about 58- 60mm.

 

[Gromit1]

Thank you Mr Diamond - On the site I can see something called a "wall flange". It is a chrome trim which goes around the chrome pipe which comes out the wall and is connected to the basin waste. The problem is that the hole in the tile is so big that even the flange doesn't cover it, so I am after something like a bigger version of the plastic chrome coloured trims which you can buy which go over pipes which go into radiators and towel rails - called pipe collars.

 

[Gromit1]

Thanks Sir R. A usual pipe collar won't be big enough. I could always post a photo of the problem.

 

[diamondtiling]

What about a big round dinner plate? cut a hole in it and spray it silver.

:8::8::8:

 

[enduro]

Put a photo on here so we can see the size of the hole, and give you ideas.

 

[Thespanishtiler]

talon do a full range of pipe collars 15mm,22mm,35mm,42mm and 110mm

any good plumbers merchant should stock them

toolstation also do them

 

[Gazzer]

Pipe Collars | Talon Manufacturing Ltd

 

[Gazzer]

Pipe Cover Systems