Advice on improving my latexing

[Knifey_Spoony]

Mate that's the worst screeding advice I've ever heard. It didnt seam to work coz it won't. Sound more like block paving lol

Guy i worked for used to do it like that.His floors were very good.Was the reason i have done so little of it because he always did the latexing.

 

[LM]

We're back again to the differences between levelling a floor and smoothing a floor. On a DEEP pour that of which a tiler may have to install this method mentioned by Doug can actually be quite effective. Obviously it wouldn't work on a wash or quick skim so to speak.

 

[Spacey]

No not at all mate
apart from being strickly karndean/amtico install now
I'm also an qualified sports floor installer and I've laid deep comounds in many sports hall averaging 800 m2 plus to take resin sports suraces.
If these aren't level and smooth with in a strict tolerance that's a potential bill of 10s of thousands of pounds.

 

[Old Mod]

Well instead of puffing your chest out, explain your methods, so we can all learn from your experience and expertise!

 

[Kyle Knowles]

As @antonio says I'm just an apprentice always learning it's nice to hear other peoples methods