Please checkout the following advertisement.
Hi all, I have a fully cured sand cement screed that howeever needed proper levelling and prep work before installimg my 120x60 Porcelaine gres tiles. My contractor proceeded in using https://www.tilersforums.com/forums/tile-adhesive/ as he advised that he can use tile https://www.tilersforums.com/forums/tile-adhesive/ to level it up rather than self levelling. Unfortunately due to unforseen shipping circumstances my tile shipment that was due on same day has been messed up and now I ended with dried up https://www.tilersforums.com/forums/tile-adhesive/ and will have to wait a couple of weeks before new shipment comes in. Tile layer is saying that it will be no issue to bond the new https://www.tilersforums.com/forums/tile-adhesive/ with old but I am really concerned as never in my experience have encounter this kind of technique so would appreciate any professional advise. I am not sure if best way forward would be to remove old https://www.tilersforums.com/forums/tile-adhesive/ altogether and re-start process again or there is nothing to worry about. Thank you i. Advance for your time!