tile spacer

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally fixed in place in an array to cover roofs, floors, walls, edges, or other objects such as tabletops. Alternatively, tile can sometimes refer to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In another sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of fired clay.
Tiles are often used to form wall and floor coverings, and can range from simple square tiles to complex or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but other materials are also commonly used, such as glass, cork, concrete and other composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

View More On Wikipedia.org
  1. M

    Lip clips and spacers

    Just had a look at the RLS clips and thinking about moving with the times and giving them a go. I normally use 2 mm spacers, are the 1.5 mm clips compatable with 2mm spacers or do you not need spacers with the clips also are the pliers needed. I know this is a topic that is well covered on here...
  2. P

    Advise On Trowel Type And Which Spacers For Quartz 600x600 Floor Tile

    Hi, Going to be installing over the next few weeks Gulf Quartz floor tiles 600x600 on a concentre floor in the kitchen. Floor will be primed first and tiles back buttered. I have read on this forum different opinions on which type of trowel and size to use - can you please advise best...
  3. G

    Worktop Or Spacer?

    In the process of tiling my kitchen walls between below my kitchen units and the worktop. I was going to start tiling with the tile resting on the worktop and working up to the unit. However, a chap and keen DIYer told me to sit the tile on a 2mm spacers to allow the bead of silicone to seal...
  4. G

    Are 2mm Spacers Ok For Large Tiles?

    Is it ok to use 2mm spacers for tiles that are 300x600? Are suretile spacers worth getting?
  5. Z

    using 1mm spacers with rectified tiles

    Hi , I am currently doing a large floor area up , 300 sqm approx. i have polished porcelain 60x60 tiles and I am considering using 1mm spacers , do you think that would be OK ? also the tiles are like ivory/white colour - i am considering using epoxy grout but what are the main benefits of...
  6. Dan

    Spacer Between Tile Trim And Last Tile, Or Butt It Up To The Tile?

    A recent thread and a couple of members made me question the way I've been using tile trim recently and I wondered which way the forum guys and gals do it. I've always butted the tile trim up to the tile WITHOUT a spacer, on both an external corner, and when tiles finish half way up a wall...
  7. M

    Tile Spacer Sizes

    Are tile spacer sizes actual or nominal? Bought what I thought was 1.5mm and 2mm and it seems as if they are 1.1mm and 1.8mm. Am trying to layout 300mm x 100mm metro tiles horizontally in shower cubicle from tray to ceiling (23 rows) and want to avoid an awkwardly-sized top row where they meet...
  8. S

    Tile Spacers, leave them in, or take them out, What say you!!!

    We are having a constant battle with learners and employers of apprentices regarding leaving tile spacers in the joint. This is something I have never done on any job ( that I can remember:rolleyes5:). There are loads of YouTube vids and many pieces of literature that show the spacer in the...
  9. A

    What size spacers? Which Mapei supplier?

    I am tiling the following floors in my house renovation and was wondering what the views are on whether I should use Mapei Latex Plus: 900x900 slate tiles on concrete floor For this floor Mapei have recommended; Prime the surface of the heating cables & the boards with Mapei Eco prim grip...
  10. Chalker

    Spacers or no spacers?

    Got a bathroom floor to tile tomorrow, in a bathroom I've been fitting. He has a pallet of the stone pictured below. question is, could I use spacers or would it not work . So will I have to just fit them without. cheers .
  11. J

    2mm floor tile spacers?

    Hi all, I'm tiling the bathroom floor this weekend using wood effect tiles (xilema wenge). They are long and thin and all online images show a narrow grout line. The floor is bounce free Chipboard overlaid with 6mm insulation board fixed with S2 adhesive and then has UHF covered in a thin slc...
  12. M

    2mm tile spacers

    Not sure if this is in the right category I use tile spacers like there is no tomorrow even tho I always use the edge of the spacer so I can pull them out and re use them if you know what I mean I always end up with less and I'm sick of buying them can anyone recommend where I can buy them in...
  13. M

    Size spacers on 60x40 trav

    Views on size spacer on 60x40 trav 2mm or 3mm is it a personal choice or is there pros and cons to a diff size spacer !!
  14. P

    Bulk spacers

    Any recommendations for buying big volumes of long leg spacers? Good prices on trade tiler but NI postage is coming up as £15 :yikes: so not viable unfortunately.
  15. R

    Grouted tile spacers

    Hello all. Just a quick one. I spoke to a guy yesterday who told me he grouted over some of his cross shaped floor spacers which he laid down in the joint between 4 tiles. The spacer has since reappeared on the joint but due to the grout having set he can't remove it. I told him he'll have to...
  16. STEVO

    What size spacer for tiles on UFH

    Doing a job this week with a colleague, 600x300 rectified porcs over UFH. Someone mentioned to him that minimum spacer size is 3mm for this install? Is that correct? I had a quick read through the Brit Standards link someone posted on here the other day, but couldnt see any mention of this...
  17. S

    Tile spacers

    often overlooked by many tilers a good tile spacer is important ;having used many over the years i have found the raimondi 3 mm spacer to be the best;the spacer is large and holds the tile perfectly in place and due to its shape it is easy to fit between the tiles and more importantly easy to...
  18. 5

    Spacer size for these please!

    Have just picked up some Porcelanosa Multicolor Nacar 20x31.6x1cm tiles that imitate the mosaic effect,mosaics end up at 4x4cm in size for Mothers kitchen splashback.Saw these laid on a kitchen display in the M/cr showroom and thought they were proper mosaics so i know if laid right can look...
  19. Andy Allen

    tile spacers and floor tiles

    just interested to know who uses tile spacers when tiling floors... ive never used spacers for floor tiles, just use stright edges and a keen eye... do you think its quicker/easier using spacers or not?..
  20. D

    What brand of tile spacer do you use.

    Short leg tile easy ones for me....:thumbsup:
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.
Tile Contractor Forum. The useful tile contractor website.

Replies you've not seen

UK Tiling Forum Stats

Threads
67,343
Messages
881,166
Members
9,535
Latest member
Teejay
Top