Did you know you can redeem your RUBI club points for cash? Follow these steps and you'll get cash back for registering...
Tilers Talk BB
Did you know you can redeem your RUBI club points for cash? Follow these steps and you'll get cash back for registering your products! #RUBItools #CashBack...
We have some existing brick and concrete slab steps we are looking to cover with 20mm porcelain tiles. We already have the tiles annd were planning to cover both the uprights and the steps.
Should we use a metal edge to protect the corners of the steps? I was not sure if porcelain is likely to...
Hi. Newbie needing advice from the experts.
I have outdoor steps which I would like to tile with R12 600x400 porcelain 10mm tiles. Problem is the steps are far from square and level - see pic.
There is a general slope, but the tiles rock significantly and the front faces are not straight. We...
Hi all
A driveway and patio contractor just laid my 56m2 patio using 1000x500x20 Italian porcelain tiles. It looks terrible, but the contractor says it's fine for a patio. The tile supplier and Larsen rep both took a look and agree that it's not fit for purpose. Both suggested a TTA inspection...
I have some outside steps to tile. The existing steps are Quarry Tiles. Would it be ok to tile over them once I have primed them. The quarry tiles are firmly fixed.
Hello guys,
I'm looking for advise how you guys deal with waterproofed bitumen steps outside. We need to lay Victorian tiles on them, just not sure what to do with this waterproofing.
What would be your recommendation for this project.
Thank you for your help in advance.
Don,
Hello,
New to this forum and I have done quite a bit of tiling in my life but I am not an expert by any means. I am trying to do the front landing of my steps in a v-shaped tile and am having a hell of a time with the corners. The problem I have is that the corner pieces are 32cm long where...
Hi all
I fancy replacing the tiles on the step on my home
i am a plasterer and I've fitted quite a few tiles over the yrs on my own projects, splash backs etc and,I've attended the nett course..
was wondering as you can see from the pic are some quarry tiles bull nosed or are they all the...
Went to start a repair on some door steps & taking the damaged tiles off it has pulled away the mortar or cement they were fixed to about 20mm
I was going to shutter it back in then tile but was wondering if there's any board, Hardi etc that's suitable for outdoor use?
Hi,
I am interested in getting a new geometric pathway installed that runs from my front gate up to my front door. The pathway itself is approx 8 foot * 4 foot with one step up to a 3 foot * 4 foot porch area. I have spent quite a lot of time looking on-line for tools to help design the...
steven.evans
Thread
aus
east
edwardian
edwardian floor
geometric
london
london tiler
pathway
steps
tiler in london
usa
victorian
victorian floor
victorian floor tiling
victorian pathway
Has anyone got a link for either Wooliscroft Oatmeal? or something similar for tiling a front door step?
Asked at CTD & they were quoting roughly £70m2.
I can get some of the old Pilkingtons through Topps but the dont have any bullnoses or corners & i dont want to use any trims.
Thanks in...
Hi there,
Further to this thread: http://www.tilersforums.com/stone-tiling-forum/60524-sawn-stone-steps-alternatives.html
We are now considering getting someone in for this work. The existing glazed quarry tiles and adhesive can be removed prior to your work. We're open to the tiler...
S60_alex
Thread
aus
exterior
find a tiler
fitting
london
london tiler
steps
stone
tiler
tiler in london
tiler wanted
tilers directory
usa
wanted
Hi all,
I am planning to replace my ageing front steps this summer and am currently reviewing a few options.
Here's a couple of pictures to start:
I had planned to use either York stone or Portland stone and got a few quotes from stone firms for supply.
As a rough guide, I need:
5 of...
hi folks not a big one to price but a dont tile steps that often
the whole area is 10m2 top landing then three steps coming of it. the tiles are 300x300 nothing fancy,ceramic
i am supplying materials and labour
two things any recommendations on adhesive, usually use tops so its mainly bal...
Okay I know its late but need some help getting my head around this one.
Got 15 steps to do for a builder I work for but when they stripped away the old mort they discovered that there was a gap between each step ( the internal angle between the bottom of the riser and the tread) Anyway the...
hi all,just a thought i had....
has anyone ever used exterior mastic/Silicon on outdoor steps on the internals?
im doing a set of quarries just now to be finsihed with charcoal grout,i thought it may look good if the internals were done with matt charcoal mastic
any thoughts on this. may...