Currently reading:
Cutting glass mosaic
Discuss Cutting glass mosaic in the DIY Tiling Forum area at TilersForums.com.
Stustunz
TF
Hi, would it be good idea just to cut backing first and then fully cut from the face?
W
WetSaw
Or you could use a ring saw!
Available for hire at very reasonable rates!
Reply to Cutting glass mosaic in the DIY Tiling Forum area at TilersForums.com
There are similar tiling threads here
Hello
I plan to tile our bathroom with 60x60 cm tiles (8 mm thick) and the shower (because of the slope from all sides) will be done with mosaic tiles (5x5 cm).
After researching I came to the...
- blackarrow1990
- Tilers' Talk - All Other Countries
- 7
- 626
Hello,
after watching so many instructional videos and planing, I just can't understand how to tile a simple drywall construction in our bathroom. I got some good advice here so I hope you guys...
- blackarrow1990
- DIY Tiling Forum
- 4
- 289
Hi all.
Just wanting some advice and wondering what the pros in here are using nowadays for cutting large format porc?
Ive been relatively lucky up until recently and been able to cut most of...
- Matthew77
- UK Tiling Forum
- 4
- 926
I've got an AKW Tuff form shower tray with a waste that is 10mm above the tray when fully screwed in. The Tiler laid my 5mm hex mosaic tiles on a 2mm bed, so obvs wasn't going to drain.
I took...
- Mike Zeidler
- Tile Adhesive / Grout Advice
- 6
- 2K
Hi, I'm new to the forum and fairly new to tiling, my only previous "proper" job was my recent bathroom (600x600 porcelain, about 25m walls and floors) which went pretty well.
I'm now having a go...
- cdbe11
- DIY Tiling Forum
- 3
- 2K
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.