Recent content by Rob70

  1. R

    Cutting glass mosaic

    Hi and thanks for reply, I didn't think about that, thank you for advice, I will have to remove them from the sill and re-do them again, bit of a pain but it needs to a good finish. Will they come off easily ?
  2. R

    Cutting glass mosaic

    Hi, Ive got a Vitrex tile cutter which is very good but I need to cut mosaics lengthways, is there anything suitable i can use as the vitrex is not suitable for a straight line ?
  3. IMG_6970.JPG

    IMG_6970.JPG

  4. IMG_6071.JPG

    IMG_6071.JPG

  5. R

    Advice needed for mosaic splash backs

    Actually, would like some advice on the best starting position, i.e the centre of cooker between hob and fan or at worktop edge ?
  6. R

    Advice needed for mosaic splash backs

    I'm going to start the tiles at the worktop edge and as these tiles don't have a straight edge is it best to cut them in or cut the sheet down so its level with worktop?
  7. R

    Advice needed for mosaic splash backs

    Can anyone advise on best way to cut these small mosaics, I'll cut out the sockets size and I will need to fill in the rest of the socket with the cut mosaics ? Also would I need a centre point as these are for splashbacks around the kitchen?
  8. R

    Advice needed for mosaic splash backs

    Doing the job this weekend but having triable finding an adhesive, can anyone recommend one ?
  9. R

    Advice needed for mosaic splash backs

    Thanks for advice, but whats best to use to cut the mosaics when finishing socket ?
  10. R

    Advice needed for mosaic splash backs

    Yes, I can confirm that the glass has a white backing paper on them, can you link me a suitable adhesive and sealer ?
  11. R

    Advice needed for mosaic splash backs

    Dynamic, how did you cut around sockets etc ?
  12. image.jpg

    image.jpg

  13. R

    Advice needed for mosaic splash backs

    These are the mosaics glass and stone.
  14. IMG_0450.JPG

    IMG_0450.JPG

Advertisement

Back