Tile cutting problem

[Italy]

You have mounted a new wheel, the sigma?

 

[Italy]

I also remember, that all still available tiles, sent in uk.
because there, there are tilers with thick skull.
As andy
Ahah sorry,sorry

 

[Time's Ran Out]

call the manufacturer of the tiles and explain how to make the cut. I've already done.

What did they say ?

Get a proper tiler in!

 

[Italy]

Get a proper tiler in!
Yes, yes. I did not want to offend andy ,ahah

 

[Andy Allen]

Cutting every one on the wet cutter now...

 

[andy-p]

I had a similar problem with fired earth porcs a few years back , full tiled bathroom . tried everything .. had to use my bridge cutter !!

 

[Time's Ran Out]

Tried cutting them on the back?

@Houston - if you think it's silly try it and see!

 

[RayL12]

Hi all,


As some of you know, I'm in my 7th week, of 16, on a Wall & Floor tiling course; lvl 2 Diploma.

Though this might not answer the question, I soon learned that the gap in between the 'planks' of the aluminium 'Step-Up', was perfect to slip a 150mm^2 tile in to create perfect slim 8mm, and less, wide pieces.

So, there's a tool that someone can invent; a Ste-up/Trestle with an adjustable plank. Or, does it exist already?

...Ray.

 

[GAZ5518]

Recently I was in on a Rubi "Breakfast Morning" where the rep had the same problem cutting a particular Matt finished rivened tile..That tile had an extra middle sandwich material...
I have often just scored that type of tile and "whacked it on the straight of a corner of something.. Giving it an even pressured break.... Invariably works for me...

 

[LM]

Hi all,


As some of you know, I'm in my 7th week, of 16, on a Wall & Floor tiling course; lvl 2 Diploma.

Though this might not answer the question, I soon learned that the gap in between the 'planks' of the aluminium 'Step-Up', was perfect to slip a 150mm^2 tile in to create perfect slim 8mm, and less, wide pieces.

So, there's a tool that someone can invent; a Ste-up/Trestle with an adjustable plank. Or, does it exist already?

...Ray.

You've lost me Ray?