Rubi Rubi Nd-200

Currently reading:
Rubi Rubi Nd-200

Search the forum,

Discuss Rubi Nd-200 in the Tiling Tools area at TilersForums.com.

S

Spud

Dob said:
Morning folks,I'm going to bin my, titan wet tile saw ,today so I need to buy a replacement, after reading scores of reviews on different brands I've decided on a, rubi nd-200,is this a good decision? I would prefer a saw with a case/box but there seems to be very few saws that have( I think I found two!!)
Thanks in advance....dob
Click to expand...
They are good little wet saws , I have one I use fairly regularly you may want to puchase a decent blade when you get it like a rubi cpc2 or a montolit DNA
 
T

Time's Ran Out

I had a Rubi 200 something 30 years ago and it was a fantastic little cutter.
Had to wear a bin liner to stop getting wet. Fixed thousands of metres of terracotta and ceramics with it.
Now onto the Dewalt 2400 and its great. Pushing the tile on a moving bed to the blade is much easier, especially with these big stone tiles we are being asked to use.
 
O

Old Mod

Dob said:
What do you guys think of the rubi nd-180-bl?
Click to expand...
DONT GO NEAR IT!
If u'd like a piece of junk, I've got one u can have for a tenner plus postage!
tighten the fence too much and the bed buckles and bows giving a scalloped cut!
Truly don't bother, bought it to get me out of trouble one day for just six cuts and not used it since! Better off buying £50 grinder and holding a £1 sponge against diamond disc!
 
W

White Room

3_fall said:
DONT GO NEAR IT!
If u'd like a piece of junk, I've got one u can have for a tenner plus postage!
tighten the fence too much and the bed buckles and bows giving a scalloped cut!
Truly don't bother, bought it to get me out of trouble one day for just six cuts and not used it since! Better off buying £50 grinder and holding a £1 sponge against diamond disc!
Click to expand...

Or a Vitrex:)
 
W

White Room

3_fall said:
Vitrex I had better luck with! Haha burnt motor out tho! :p
They're the type of machine I've never really got on with Mark tbh.
Just don't like them!
I'll take a grinder over those anyday. :)
But now I have my DX, and that'll eat ANYTHING! Haha :D
Click to expand...

MSN-Emoticon-face-037.gif
 
O

Old Mod

Andy Allen said:
Only 2 cutters I own is a vitrex and nd 200....cuts anything I need to cut.
Personally I don't like cutters that are the size of a small bungalow, you need an artic lorry to get it to site, and take a whole day to set it up !!.....my mates rubi bridge saw was like that...
Click to expand...
Haha takes 90 secs to drop legs down, ok I will admit the DX is a little heavy and it does need its own parking space! :D
Seems to be getting to a stage tho where even slide cutters need to be at least
1000mm.
And if I look after my wet cutter, I'll never need another one, it'll outlast me!
 

Reply to Rubi Nd-200 in the Tiling Tools area at TilersForums.com

Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.

Advertisement

Tiling Tools

Find the cheapest price for both professional and DIY wall and floor tiling tools in the UK. Brands such as Rubi, Genesis, Fein, Karl Dahm, isomat, Schluter, Tilemaster and more.

You're browsing the Tiling Tools category on TilersForums.com. Find the correct trowels to use with which type of tiling. Find advice on lash clips and levelling systems and more.

Top