Pebble mosaics - a first - ways to tile with pebble mosaics - TilersForums.com

[widler]

Ive fit them once, they didn't tess ,erm tesla ,erm teslel , erm fit togeather right well so you have to fiddle about with em

 

[widler]

Ps, only about 4 m2 and I used loads of grout, a right mare to do

 

[Rich Midge]

I've done about half a dozen wetroom floors in pebbles over the years and always had to strip the sheets. Most memorable however was the first time I used them, 4m kitchen splashback complete with all the sockets, switches and fuse spurs you can imagine.

 

[Italy]

...

 

[widler]

One good thing about them is you don't have to worry about lippage

 

[WetSaw]

One good thing about them is you don't have to worry about lippage

I had real trouble getting the lash clips to stay in place and I had use loads. Don't know how you guys do it freehand.

 

[Cris]

Used once.....Seal well before grouting

 

[Italy]

...

View attachment 86777 View attachment 86778

I did two jobs, one is that of the photo, the floor made with sand and cement, (I am ashamed to say), I had to remove them from the card, impossible to pose.
only difficulty encountered, some panels, had stones, type balls, beautiful round and other more flat stones.
another job, 10 sqm curb house, I called my son and I did remove all the paper.
there are also not glued, stones in bags, are the same and cost less.
and the work comes out best and fastest.
grouting, all with Mapei and latex.
I hope you understand what I wrote.