Hi, and opinions needed

[sengaul]

Hello all

I cant remember if i have posted to introduce myself and say hi so i thought i'd do it again.........or for the first time.

I'm looking forward to reading through the forums and picking up some useful tips.

I do have a question.......well more asking for peoples oppinion. I've been asked to put in a shower cubicle for someone and they have asked if i would also re-do the floor. Initially they wanted to do it all in tiles, but now they have decided that they would like it done using Multipanel tilepanels and Multipanel twinfloor floor panels, now i would prefer to do this room using proper tiles.....for the experience and more importantly the finished look, but they are pretty adamant.

I was just wandering if anyone has used these before and any problems or oppinions on them. I've looked at the site for them and looks very straight forward.

Hope i've posted this in the right forum, my apologies if i haven't.

Thanks people.

 

[DHTiling]

Hello and welcome...


Not a product i have heard of..?

 

[suave]

:welcome:

 

[White Room]

Hi and welcome

Don't know if these wear the same sheet but the other halfs mother had somethink similar put in, they looked rank IMO

 

[david campbell]

:welcome:to the forum
never heard of it

 

[doug boardley]

welcome Sengaul:welcome:

 

[The Legend; Phil Hobson RIP]

:welcome:m8, sorry never heard of this

 

[united]

Hello and :welcome:

 

[Scott]

Hi

I think these are similar to mermaid shower panels but tile effect embossed panels instead of marble or stone effects. Not my cup of tea and to be honest nothing remotely like tiling.

I have fitted mermaid and other manufactureres panels. More carpentry than anything else. Never put anything like it on the floor though

HTH

 

[faithhealer]

Welcome Sengaul. Multi Panel are made by grant westfield and are at least the top end of 'wet wall', being 11mm thick . Sealing the 'edging joints' is where you have to be careful. The floor is just a flash laminate floor, wouldn't try to lay it unless every thing is 'out'! Expensive if you cut or drill a hole in the wrong place!

 

[Diamond Pool Finishers]

hi :welcome:

 

[albyshellshear]

:welcome:

 

[mikethetile]

yes fitted them as wall panels, straight forward to fit

never used floor panels, didnt know they did them