Hi All from Bob Har my first post

[bobharland]

Hi Hope im in the right place 1st ques i wish to lay slc on top of slc is it ok and will i need to prime can i use SBR as primer iam useing cemtoplay as the slc do i need to use their primer thanks for your help Bobhar:mad2:

 

[united]

:welcome:

 

[White Room]

i would prime but thin the sbr 3-1.

Hi and welcome

 

[faithhealer]

welcome Bob, not sure but I would say no but sure someone will be along soon to confirm. Depth might come into play
is that a yes then Mark

 

[The Legend; Phil Hobson RIP]

:welcome:Bob I would ring their tech dept. Not familiar with that product

 

[suave]

:welcome:

 

[Diamond Pool Finishers]

hi bob :welcome:to the forum

 

[nybor62]

:welcome: bob, how deep is the coat of slc you have at the moment.
which one from this link do you intend using ,imo would have been better to have got the required depth in one hit, making it much stronger

Adhesives and Sealants for the DIY, Trade & Stationery Markets

 

[jay]

:welcome:

 

[albyshellshear]

:welcome:Bob

 

[david campbell]

:welcome:to the forum

 

[DHTiling]

Hello and welcome..

 

[finlay]

:welcome:bob

 

[bobharland]

Hi to all the welcoms the slc at presant is 4 to 5m thick i have aready purchased my slc i have 2 types cempolay and cempolatex 1 pack iam akeen diyer and re quire to try and get this right as i am laying pitch pine parquet blocks on top many thanks for your help please be patiant im new to fourums Bobhar

 

[bobharland]

Hi Rob when i removed the carpets the slc was already down and not very leval its about 4 to 5m thick i have bought the slc cempolay and cemplatex 1 pack can you help i intend putting pitch pine parquet blocks down after slc has cured many thanks Bobhar:mad2: