Guys ive solved the problem of bad calibration

[Balloo]

You can take a look at this format i came up with a while back, ive had numerous calls from tile shops as word has got about that this has actually worked for bad calibration in tile, most common i think in Spanish products,.

Try for yourself and see what you think, i now tile everything this way to eliminate any problems. Some of you may have came up with this already. If not id like a badge for being so great

 

[Time's Ran Out]

So are they are all perfect on the horizontal?

 

[Balloo]

They all end up corresponding with the other in equal correlation

 

[Balloo]

Sorry I should mention that these are the arrows at the back of the town

 

[Just Rizzle]

my solution to bad tiles is to get in my van and drive away, your on to a looser if you try to sort it bad tiles are always bad tiles

 

[Time's Ran Out]

Sorry I should mention that these are the arrows at the back of the town

Is that town Belfast?

 

[Waluigi]

Quite the nitpicker lately, John

 

[Time's Ran Out]

Quite the nitpicker lately, John

And you were doing so well!

 

[Balloo]

Is that town Belfast?

Is that town Belfast?

On the cooking sherry last night

 

[Dumbo]

I completely missing the point as to why this works in any way shape or form. Also are you talking about irregular shaped tiles rather than square tiles which may have a difference in size between tile to tile

 

[Balloo]

I completely missing the point as to why this works in any way shape or form. Also are you talking about irregular shaped tiles rather than square tiles which may have a difference in size between tile to tile

irregularity in a tile jig is very common it can be small are large depending on manufacturer and QC, it throws of the true square of the material it can be counteracted by setting the tile in the pattern i posted that the good Lord himself sent me in a vision for the tile community to benefit from .
Try it out for yourself

 

[Dumbo]

irregularity in a tile jig is very common it can be small are large depending on manufacturer and QC, it throws of the true square of the material it can be counteracted by setting the tile in the pattern i posted that the good Lord himself sent me in a vision for the tile community to benefit from .
Try it out for yourself

So you are talking about tiles being out of square rather than being sizey .

 

[Time's Ran Out]

A good apprenticeship would solve all your issues!
As I’ve mentioned occasionally if the job was that easy they’d do it themselves.
On walls in bathrooms it should be no problem and on larger areas you use ‘bays’.

 

[Balloo]

A

So you are talking about tiles being out of square rather than being sizey .

are they not comparable

 

[Andy Allen]

Learn to tile without using spacers...
I've never used a spacer yet on a floor..
Straight edges ....are all you need..

On walls use wedges, cardboard, spacers turned flat...

 

[Just Rizzle]

Learn to tile without using spacers...
I've never used a spacer yet on a floor..
Straight edges ....are all you need..

On walls use wedges, cardboard, spacers turned flat...

you ll be using matches and spaghetti next lol

 

[Dumbo]

A
are they not comparable

No if you one 397 and one 400 no amount of turning is going to make it fit