Epoxy glue to bond stainless steel cutter bed.

[DHTiling]

Any recommends for a strong epoxy glue to bond the table bed back together on my broken cutter..?

 

[Dougs Third Go]

Lou says probably, her speciality was stainless steel Dave.

 

[DHTiling]

It is to bond a flat table to a support bracket doug.. it has around 12 inches of flat steel to glue to again a flat area of steel that supports the table , so it tilts it to 45 for mitre etc. , so around an inch overlap... i know it should be Tig welded but thought gluing with a super strong steel epoxy would work..

 

[Dougs Third Go]

Lou's being technical and talking engineering terms to me Dave (she's showing off), super epoxy glue would be her first course of action as apparently TIG welding can cause some distortion between the different components...(her words not mine,,,,that's why I hate working for engineers!!)

 

[DHTiling]

well found some on the net specifically for stainless steel. so worth a shot.. got some brick acid washing to do to get it clean first.