Search the forum,

Discuss 900x600 20mm Porcelain on a terrace 130mts in the Canada Tile Advice area at TilersForums.com.

Simon Dale

TF
Esteemed
Esteemed
Reaction score
5,333
Points
1,108
Location
Maidstone
Im a tiler hes an engineer. I wouldn't tell him how to screw a nut and bolt so I assume he will think the same Lol. As for drawings its a simple job around the length and width of his house. He kicked the last tiler off for not mitring internal skirtings in Porcelain which were semi bullnosed. We went there and replaced them correctly. I will give him the Shluter spec and he no doubt will agree
 
O

Old Mod

@impish has used Gutjahr recently.

I’ve used 3-4 different methods over the years.
Straight to screed on patio.
There’s a number of products similar to Ditra-Drain but they go under the screed over the slab, then tile screed.
Ditra drain on screed then tile.
And on some balconies that were covered with asphalt and falling the wrong way, I corrected the falls by use of wedge boards which were taped and jointed then waterproofed at the perimeter and on the joints and then tiled.
There were seven and they’re still in tact, and I still speak with client.
And on timber terrace I’ve waterproofed with mapelastic and fitted Ditra Drain and tiled.

I think if all sensible precautions are taken, a good fall or Aco drain fitted, then a successful install is easy enough.
As long as any timber substrates are prepped correctly and are deflection free and load bearing, they should be fine.
 

Reply to 900x600 20mm Porcelain on a terrace 130mts in the Canada Tile Advice area at TilersForums.com

Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

New Tiling Questions

Replies you've not seen

Top