ooooopppppppsssss!!!!!!!

connors12345 · Nov 10, 2008

made a bit of a mistake on the tiling that i was doing so well at, its for the brother in law. looked all over and looked spot on. but on further inspection ie photos i took noticed this balls up. what do you suggest, take a chance and leave it or take it off. if the latter how do i go about it
cheers a peed off ian

DHTiling · Nov 10, 2008

Easily done ian...... ...you will know next time.....if you can get the border out and have a spare.. change it..

brian c · Nov 10, 2008

Ian m8.its not very noticeable but i can see it on the border that you have put the dark colour against the dark colour.If you really wanted to you could take it out no probs and scrape out all bits,prime and insert another border.

just be careful if you take the border tile out and use a small chisel and hammer.

doug boardley · Nov 10, 2008

have I missed something connor? are base tiles on brick bond, oh yes,on the mozzy,which is the shortest length to a corner? I'm guessing that the other borders are following the one that is upside down, so it might be a strip out to the corner. Must admit I didn't see it at first, was to busy trying to see if base tiles were bb

DHTiling · Nov 10, 2008

doug boardley said:
have I missed something connor? are base tiles on brick bond,

look again..maybe some specs might help...🙂🙂

Fekin · Nov 10, 2008

:lol:.....

connors12345 · Nov 10, 2008

i have made a decision and am going to leave it. they will have spares over and if they notice it i will replace it. being a bit mean here but we have over run by about a day and a half already because we had to strip off all the old wallpaper and the junk in the loft had to be moved which they promised they would do. if i can get away with it super duper, might even be able to get the towel radiator to cover it..... IF THERE IS ONLY ONE WRONG????????????????????????????????????????

brian c · Nov 10, 2008

:lol::lol::lol: come on Doug m8.its in the replies...lol

LJB Tiling · Nov 10, 2008

doug boardley said:
have I missed something connor? are base tiles on brick bond,

In the 2nd row in at the bottom and top he's missed out 2 of the lil square pieces that go in between the 2 grey pieces:lol:

connors12345 · Nov 10, 2008

Fekin said:
:lol:.....

thats nice innit mock at my mistakes..... i would be more sympathetic... HONEST

ooooopppppppsssss!!!!!!!

UK Tiling Forum; Established 2006

Welcome to the UK Tiling Forum by TilersForums.com, built in 2006 by Tilers, run by Tilers.

Tilers Forums Official Sponsors

connors12345

TF

Attachments

DHTiling

brian c

doug boardley

DHTiling

Fekin

connors12345

TF

brian c

LJB Tiling

connors12345

TF

There are similar tiling threads here

Featured Threads

Advertisement

Thread Information

Thread Tags

Advertisement

UK Tiling Forum

Thread statistics

Thread statistics