Recent content by morgan4367

Hi Dave The chipboard looks fixed.

Hi Ive got to qoute on laying porcelain floor tiles 60 x 60cm on a floor 24.5m2. Half the floor is quarry tiles which are soundly fixed, and the other half is chipboard. I take it you would use a decoupling membrane, my question is do you use it on the whole floor or where the two subtrates...

Im looking at spending up to £600.

Hi every one, Im looking at investing in a good wet cutter for natural stone, slate,trvertine etc.As ive got these type of jobs comeing up soon.In the past ive used a plasplug master tiler but it seemed to struggle a bit cutting these materials over a big area.Also what is the...

Thanks guys, yes i meant the ufh mat. you have been most helpful.

Thanks for the responses, can i lay the slate tiles striaight onto the tiles with out putting putting down a self leveller.

Hi every one Going to qoute a job tomorrow, slate tilng with ufh on a conservatory floor. Do i lay a self leveller over the matting, and is a single flexible adhesive sufficient. Any other advice would be most helpful. Thanks Tony

Thanks barry bp would you use a single part flexible adhesive to lay the boards and matting.

Hello whitebeam 20m2 is of floorboard and 8.78 is of screed.

Hi guys Went to look at a job tonight, the client wants porcelain tiles 60 x 40cm laid on a kitchen/diner floor 30m2.The floor is half screed half floor boards and wants under floor heating. Any advice on weather to use a decoupling membrane or to lay plywood, and can you lay ufh...

Hi every one, tiled a bathroom about three weeks ago and grouted with a bal superflex ivory grout. I got a phone call from the customer saying it is going dark in places, so i will be going to have a look tomorrow. Any ideas why this is, and what course of action to be taken if any. Most...