Dave's latest activity
-
Dave replied to the thread New tiled floor buildup.Its the same issue self levelling over plywood. The bond isn’t guaranteed under new regs. You could use a system like a self adhesion... -
Dave replied to the thread New tiled floor buildup.Hi. First off you cannot tile to plywood anymore. I would be looking at seeing why the floor is deflecting. Rectify and then cover...
-
Dave replied to the thread Discoloured Porcelain Tiles - Any Suggestions? (UK).Are the darker ones in front of the shower ?
-
Dave replied to the thread Decoupling mat, seal or not?.Hi. What’s your reason for using a decoupling mat and which one ?
-
Dave replied to the thread Changed some email settings, confirm you got this?.White screen and black txt with ghosting
-
Dave replied to the thread Tilers Community Group on Facebook says the Tiles Industry is Dead - is he right?.I’m busy. 🤷♂️
-
Dave replied to the thread Most flexible floor tile adhesive for limestone with UFH?.Just depends if you have enough depth.
-
Dave replied to the thread Most flexible floor tile adhesive for limestone with UFH?.Hi. No flexible adhesive will stop the tiles cracking. If the subfloor cracks , then these will crack the tiles as well. I always use an...
-
Dave reacted to Mark R's post in the thread Porcelain tiles on skimmed honeycomb plasterboard wall with
Like.
Thanks for confirming Dave 👍 -
Dave replied to the thread Porcelain tiles on skimmed honeycomb plasterboard wall.There are 5.5 tiles to the mtr. Even with a small amount for adhesive etc. it will be fine.
-
It hasn't been pointed yet. He ran out of time. I think he's coming back next week. I don't want that in the house again so won't be...
-
Dave replied to the thread Brick slip sealer in kitchen.It’s solvent based hence the smell. It normally goes once dry. Were they sealed again after pointing ?
-
Dave replied to the thread Brick slip sealer in kitchen.The smell should go once dry. Well ventilate the room
Featured Threads
-
- F
- W
-
- I
-
-
-
