Recent content by Bopster

  1. Bopster

    Flagstones over UFH

    How thick is the screed over the ufh. Generally 50-70mm. Another 40mm will warm but as mentioned take time, however it'll keep warm for even longer for to thermal mass so once up to temp wouldnt be any more to run than normal
  2. Bopster

    How to grout uneven split face effect tiles

    Sealing the tiles will make cleaning the grout of far far far easier. Trust me, I've learnt the hard way.
  3. Bopster

    How to grout uneven split face effect tiles

    Ahhh, then tiles are a nightmare, good luck. Seal the tiles first then I prefer a grout bag to gun.
  4. Bopster

    Weird marks —- help!

    Hope those marks aren't showing dot and dab installation
  5. Bopster

    Tile levelling 10cm x 20cm

    Still wouldn't recommend it, you'd get through a serious amount of clips in no time. what substrate are they going into? If it's smooth no clips, if it's rough then correct it
  6. Bopster

    Tile levelling 10cm x 20cm

    Not on tiles that small, I only use them on 50cm upwards
  7. Bopster

    Porcelain Jigsaw Blade

    Topps gave me some to try on porcelain ages ago. Save your money, complete waste of time. Get an angle grinder with a decent blade
  8. Bopster

    Dewalt D24000

    It's being replaced by the ds36000
  9. Bopster

    Expansion gap

    That's what I was hoping mate, if it was 7mm upwards I was thinking of a white trim to match conservatory. Would prefer silicon though
  10. Bopster

    Expansion gap

    I'm going to be tiling a conservatory floor which has wet ufh. 3 walls are metal frame of conservatory other wall is a combination of skirting board, expansion joint to tiled floor. My question is on the 3 metal walls how much room do I leave for expansion? I'll be using colour matched silicon...
  11. Bopster

    Tiles sound hollow and are coming loose

    I'm going with poor technique, what was the weather at the time as if using rapid set im guessing the adhesive was going off too quickly. Even then not back buttering them is stupid
  12. Bopster

    CaberFloor

    Can you replace the chipboard with 22mm no more plug.
  13. Bopster

    Black Slate Shower Tray HELP!?!

    Is that an MX slate effect resin tray? If so good luck im afraid. I replaced a 10 month old white version that had water marks. Water doesn't fully drain off the tray because of the texture and there being very little fall to the drain. Terrible design and replaced with a smooth finish tray.
  14. Bopster

    Soft /expansion joint

    I'm fitting 18mm skirting so will aim for 10mm gap to wall. I'm confident 2mm is fine
  15. Bopster

    Soft /expansion joint

    Kitchen is 11sqm of tiles laid around kitchen and not under, conservatory is 22sqm to be laid then new skirting onto. 450x450 tiles back buttered obviously. Schluter preformed is what I'm thinking best thanks
See more

Featured Threads

Advertisement

Tilers Forums UK | UK Tiling Forum
https://uktilingforum.co.uk | UK Tiling Forum
Back