Prev
Master EnSuite - unfortnately floor is out of level and customer wanted a full wall tile up from the floor, so a bit of jiggery pokery necessary
Next
Prev
Master EnSuite - Flexible, reinforced self levelling compound screeded off the top of the strip of HBB using an 1800mm straight edge to provide a flat and level floor for tiling.
Master EnSuite - 120mm strip of HBB fixed with adhesive and screws (as with other boards) along the lowest side of the floor to make up the additional 8mm needed to level the floor. This will act as a runner for installing the levelling compound.
Master EnSuite - unfortnately floor is out of level and customer wanted a full wall tile up from the floor, so a bit of jiggery pokery necessary
Master EnSuite - all boards now nearly fixed, taped and filled
Master EnSuite - 1st few boards now taped and filled
Master EnSuite - The boards are screw fixed through the adhesive bed approximately every 150 - 200mm, then the joints of the 1st two boards taped and ready for filling
Master EnSuite - 1st two boards fixed into the adhesive bed
Next
M

Master EnSuite - unfortnately floor is out of level and customer wanted a full wall tile up from the floor, so a bit of jiggery pokery necessary - Tilers Forums: The USA & UK Tiling Forum for Tile Fixers and DIY

There are no comments to display.

Media information

Album
Hardie Backerboard Floor Preparation
Added by
merlecollins
Date added
View count
351
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Featured Threads

Advertisement

Tilers Forums UK | UK Tiling Forum
https://uktilingforum.co.uk | UK Tiling Forum
Back