Prev
I paint a coating of Mapegum to either side of all internal corners and bed in the Mapeband, that I have previously cut to length. I always use either the flat side of my serator or a grouting float to make sure this is firmly adhered to the coating, flat and air bubble free.
Next
Prev
Second coating of Mapegum over the previously bedded in Mapeband.
Always make sure the Mapei logo is facing out when installing the Mapeband.....
Mapeband ready for it's second coating of Mapegum.
I paint a coating of Mapegum to either side of all internal corners and bed in the Mapeband, that I have previously cut to length. I always use either the flat side of my serator or a grouting float to make sure this is firmly adhered to the coating, flat and air bubble free.
Not great!!
Out of level gully with gap underneath.
Floor after I'd made some initial remedial making good orks to the tray with Mapei Keraquick. I also filled the gap under the gully and filled the gap at the bottom of the plasterboard.
Next
M

I paint a coating of Mapegum to either side of all internal corners and bed in the Mapeband, that I have previously cut to length. I always use either the flat side of my serator or a grouting float to make sure this is firmly adhered to the coating, flat and air bubble free. - Tilers Forums: The USA & UK Tiling Forum for Tile Fixers and DIY

There are no comments to display.

Media information

Album
Mapei Waterproof Tanking Kit
Added by
merlecollins
Date added
View count
582
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Featured Threads

Advertisement

Tilers Forums UK | UK Tiling Forum
https://uktilingforum.co.uk | UK Tiling Forum
Back