Travertine - grout3000

[dboden]

My first bathroom with travertine, has anybody out there used TA grout 3000?
Is it ok on travertine, filling holes etc....
Also what size spacers do you tend to use on travertine 3mm??

Thanks

 

[Stef]

Not used grout 3000 on travertine but used it on ceramics & porcs & it is a fantastic grout to use.
Don't see it being a bother with Trav though.
I tend to use a 3mm spacer for the bulk of my work.

 

[Ian]

Used it a few times on travertine, just as excellent on that as it is on other tile types. I found the limestone or jasmine are very complimentary colours to use.

 

[Dave]

What size is the travertine ?
Is it rectified edge or tumbled or chiseled etc ?

2mm max for me with stone on walls but if tumbled then sizing can be an issue and tight joints won't always work.
Take each job at face value I say.

As for the grout 3000 , its a good grout and sets fast enough to prevent edge leaching/framing.

 

[dboden]

Thanks chaps, I have the Jasmine Bri.. David , these are the tiles...

http://www.toppstiles.co.uk/tprod42391/Royal-Travertine.html?gclid=CKSLzpGnh8QCFUcTwwodKZwANg

 

[Dave]

2mm then 🙂

 

[dboden]

Thanks..... just thinking, whilst tiling window reveal (obviously without trim) do you tile wall first, allowing the reveal tiles to be shown??..