Taking a break when using leveling system - Tile Advice

[rmgfronm]

I need to tile a large irregular shaped room and don't see a way around taking a break. The tile is tiles laid befor ethe break plank and I am using a wedge based leveling system. What 's the collective advice for how to stop and finish sections? I.e. I amm concerned about how to make sure I get a smooth transition from the tile laid before the break to the ones I am starting after the break. I thought I would just insert the clips before the break. Will that work ?

Thanks 1

 

[Dumbo]

Some people insert clips and then dry lay a tile next to a fixed tile and put the wedge in place to hold the clip in place

 

[J Sid]

Yes Jerry, that's what I do

 

[Dumbo]

Yes Jerry, that's what I do

That's because you're a proper tiler

 

[J Sid]

That's because you're a proper tiler

I wish 😔

 

[Dumbo]

I wish 😔

What so you're a chancer like me .
I'm like a eunuch in a brothel .
I've seen it done
I know how to do it
But I just can't do it

 

[J Sid]

What so you're a chancer like me .
I'm like a eunuch in a brothel .
I've seen it done
I know how to do it
But I just can't do it

My secret is out 🤐

 

[Tony_C]

As above, and if you do accidentally break a clip you can remove the broken one and replace with a multi tool.

Tile Leveling System Tips and Tricks - https://www.tilersforums.com/media/tile-leveling-system-tips-and-tricks.16242/

 

[Memoria damnata]

I usually clean the glue in the place of installation of the pleps.

 

[Dan]

I never thought of that.

Off-cut tile get used?

 

[Memoria damnata]

after pasting the last row for today. clean glue along the edge. for clips for tomorrow. then I will take a photo.