Looking for bridge saw recommendations..

[peteablard]

Evening all,. I've got a job coming up which is approx. 300m2 600x1200 20mm porcelain. I'm looking to invest in a decent bridge saw and wondered what you guys are using and what you'd recommend or advise me to stay clear of. There will be a lot of envelope cuts so will probably be looking at something capable of cutting up to 1500, cheers

 

[Bill]

I have a raimondi 1200 and they are terrific cutters. Look at the zoe model or the pikus both by raimondi.

 

[Bill]

Pete - give jim at Jim @TilersTools (@tilers_tools) | Twitter - https://twitter.com/tilers_tools a call - he is Cheshire based (Knutsford I think)

 

[Old Mod]

There’s a new Monty blade Peter, specifically aimed at the 20mm porc.
See if I can find it for you.

 

[Old Mod]

Here we go Pete.

Giuseppe Maffei - https://www.facebook.com/groups/356424981470601/permalink/449312042181894/

 

[Old Mod]

Here’s the full site page

The Best Diamond Blade for Porcelain Tiles DNA SCX - https://www.montolit.com/diamond-blade-ceramic-dna-scx-2/

 

[One Day]

Pete - give jim at Jim @TilersTools (@tilers_tools) | Twitter - https://twitter.com/tilers_tools a call - he is Cheshire based (Knutsford I think)

Exactly what I would have said Tom. I have bought tools from Jim and the service is A1.