poynton phil
TF
Got a 27mq porcelain floor to do, and was wondering if this spec sounds ok.
18Mmm chipboard, onto joists, with waterfed ufh
Chipboard screwed to joists at 300mm centers, all joints supported and screwed
Chipboard overboared with 6mm hardie backer, glued and screwed at 150mm centers
Durell uncoupling mat, and tiles stuck down with keraquick spf
Any advice will be appreciated, Thanks.
18Mmm chipboard, onto joists, with waterfed ufh
Chipboard screwed to joists at 300mm centers, all joints supported and screwed
Chipboard overboared with 6mm hardie backer, glued and screwed at 150mm centers
Durell uncoupling mat, and tiles stuck down with keraquick spf
Any advice will be appreciated, Thanks.
