brick bond

Search the forum,
Brickwork is masonry produced by a bricklayer, using bricks and mortar. Typically, rows of bricks called courses are laid on top of one another to build up a structure such as a brick wall.
Bricks may be differentiated from blocks by size. For example, in the UK a brick is defined as a unit having dimensions less than 337.5 mm × 225 mm × 112.5 mm (13.3 in × 8.9 in × 4.4 in) and a block is defined as a unit having one or more dimensions greater than the largest possible brick.Brick is a popular medium for constructing buildings, and examples of brickwork are found through history as far back as the Bronze Age. The fired-brick faces of the ziggurat of ancient Dur-Kurigalzu in Iraq date from around 1400 BC, and the brick buildings of ancient Mohenjo-daro in Pakistan were built around 2600 BC. Much older examples of brickwork made with dried (but not fired) bricks may be found in such ancient locations as Jericho in Palestine, Çatal Höyük in Anatolia, and Mehrgarh in Pakistan. These structures have survived from the Stone Age to the present day.

Brick dimensions are expressed in construction or technical documents in two ways as co-ordinating dimensions and working dimensions.

Coordination dimensions are the actual physical dimensions of the brick with the mortar required on one header face, one stretcher face and one bed.
Working dimensions is the size of a manufactured brick. It is also called the nominal size of a brick.Brick size may be slightly different due to shrinkage or distortion due to firing, etc.
An example of a co-ordinating metric commonly used for bricks in the UK is as follows:
Bricks of dimensions 215 mm × 102.5 mm × 65 mm;
Mortar beds and perpends of a uniform 10 mm.In this case the co-ordinating metric works because the length of a single brick (215 mm) is equal to the total of the width of a brick (102.5 mm) plus a perpend (10 mm) plus the width of a second brick (102.5 mm).
There are many other brick sizes worldwide, and many of them use this same co-ordinating principle.

View More On Wikipedia.org
  1. T

    bathroom floor porcelain tiles brick bond!!

    hi guys doing ma first floor 2morrow its porcelain long tiles and they want it like a brick bond effect i need to ply is well!!i feel confident about it there polished and am gonna seal them just to be in the safe side but if anybody can give me more advice/tips it well help a lot thanks guys
  2. W

    Brick Bond

    How do you do a brick bond floor? I've set the floor out ok, but just wondering how you get the 2nd row to lie exactly half a tile over from row 1, and then ensure that row 3 is exactly back in line with row 1? If you get what i mean- i was gonna mark all the tiles half way across and use that...
  3. B

    Brick Bond

    HI lads,just done a bathroom in Metropolitan tile[200x100mm],layed in a brick bond.Which way do you experienced lads find best to do this type of bond.I have done a fair bit of brick bond lately but whichever way i choose to set out i seem really slow.I have tried laying 3 or 4 courses and doing...
  4. V

    Brick Bond - Setting Out

    Re: Any new tilers stuck at all, with anything? mite have a job doing a full bath room but she want's them putting on like brick work how do you set this out ?

Advertisement

Top