By Country
America Tile Forum
UK Tiling Forum
Canada Tile Forum
Ireland Tiling Forum
Australia Tiling Forum
Forums
Navigation
By Country
GB Tiling Forum
USA Tile Forum
Australia Tile Forum
DIY Tiling
Tiling Courses
Tiling Tools
Tiling News
Pro Tilers Only
Tile Adhesive / Tile Mud
Cutting / Cutters
Tiling on Underfloor Heating
Tanking And Wetrooms
Find Discontinued Tiles
Specialist Tile Advice
Tile Restoration
New posts
Advice Leaflet
Blog
News
Add Your News
What's new
New posts
New media
New media comments
New resources
New profile posts
Latest activity
Media
New media
New comments
Search media
Resources
Latest reviews
Search resources
Members
Current visitors
New profile posts
Log in
Register
What's new
Search
Search
Search titles only
By:
Words:
Navigation
By Country
GB Tiling Forum
USA Tile Forum
Australia Tile Forum
DIY Tiling
Tiling Courses
Tiling Tools
Tiling News
Pro Tilers Only
Tile Adhesive / Tile Mud
Cutting / Cutters
Tiling on Underfloor Heating
Tanking And Wetrooms
Find Discontinued Tiles
Specialist Tile Advice
Tile Restoration
New posts
Advice Leaflet
Menu
Log in
Register
Install the app
Install
Forums
Advice by Country
Australia Tiling Forum
Clean block paving
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Search the forum,
Message
[QUOTE="Old Mod, post: 778094"] Hey [USER=44192]@Andystiletiling[/USER] what about a poultice, u may have necessary chemicals already which means u can try straight away rather than leaving in to soak in more. Not saying it'll work but might diminish it a great deal. How bout this, couldn't remember the right chemicals so found this..... Alkaline poultice cleaners and strippers are commonly used for cleaning or degreasing masonry surfaces and for paint removal. Sodium hydroxide is the most common alkaline cleaning agent in proprietary cleaners for a range of masonry substrates, including limestone, sandstone, brick and terracotta and is the most common ingredient in proprietary paint removers. Care must be taken in the use of sodium hydroxide based cleaners to minimise risks to the building and the user. Sodium hydroxide based cleaners and strippers must be neutralised with acid afterwash. Adjacent, dissimilar building surfaces must be protected and personal protective equipment worn by the cleaning operative. In the field of stone conservation ammonium carbonate is added to clay and clay/paper poultices to remove soiling from limestone. Ammonium carbonate is a less alkaline cleaner than sodium hydroxide. It works by reacting with calcium sulphate on the soiled surface to form calcium carbonate and soluble ammonium sulphate that can be rinsed off with water. These 'active' or 'chemical' poultices are all applied to a pre-wetted surface to minimise penetration of the chemical into the masonry surface and covered with plastic film to prevent the poultice drying out. The cleaning additives in these mixtures chemically dissolve the soiling or staining which is held to the surface of the poultice, and then both the cleaning agent and the contaminant are removed with the clay. Rinsing with water and, where necessary neutralisation, follows to remove any soiling that remains on the surface and also to remove residues of the chemical cleavers. Hope it helps mate. [/QUOTE]
Insert quotes…
Verification
Post reply
Please visit our sponsor websites, they keep the forum free to use!
Advertisement
Share This Page
Facebook
Twitter
Reddit
Pinterest
Tumblr
WhatsApp
Email
Share
Link
Forums
Advice by Country
Australia Tiling Forum
Clean block paving
Top