Currently reading:
Surface mounted threshold trim

Search the forum,

Discuss Surface mounted threshold trim in the Canada Tile Advice area at TilersForums.com.

Albert

TF
Arms
Esteemed
9,515
1,253
Gateshead NE8, UK
Can anyone recommend a decent surface mounted threshold trim, I have a tile to tile doorway to cover, and a tile to floorboard one, both flush, and no room to get anything in between the two surfaces.
Schluter do a T shaped cover, jointing strip
 

macten

TF
Esteemed
Arms
1,871
1,158
Nottingham
CTD do one.
IMG_0063.JPG

Its one of those that you can drill and use plastic pegs but I just gob 'em and they're cheap as chips.
 
Last edited:

Filip

TF
43
498
Midlands
@macten When you say gob'em I assume you mean adhesive or silicone but which side do you stick grey tile tile side or black and white tile side
I ask because I have 3 to do to finish my daughters new build kitchen floor and have the same plastic peg threshold strips I don't fancy drilling the floor as I dare not drill too deep and so some sticks like sound s a better option. But if I whack a load of sticks like down how will the tiles expand underneath it.
 

Reply to Surface mounted threshold trim in the Canada Tile Advice area at TilersForums.com

There are similar tiling threads here

I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper. A plumber/builder fixed...
Replies
1
Views
823
    • Like
Hi, I am planning on tiling my concrete garage floor with porcelain tiles. The concrete was laid down several years ago by a previous owner, and it looks like it was also polished and sealed -...
Replies
2
Views
1K
Hello, after watching so many instructional videos and planing, I just can't understand how to tile a simple drywall construction in our bathroom. I got some good advice here so I hope you guys...
Replies
4
Views
234
Hello, I'm just a home owner who doesn't have much experience with tiling but I'm looking for advice on fixing a few problems that a professional left me with. He of course has not responded to...
Replies
12
Views
2K
Hi all, I've laid some Arditex NA over the kitchen floor area (not under cabinets. The area is 4.5m x 1.8m. The top third of the room is totally level. The remainder of the room has a slope...
Replies
3
Views
1K
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

Top