Search the forum,

Discuss a mosaic swimming pool film in the Australia Tiling Forum area at TilersForums.com.

Thanks guys, to get a nice flat mosaic , you need a nice flat sub straight, then an even distribution of Adhesive by even combing , then carefully place sheets of mosaic ,then a nice even say rubber float batting in all over :p good luck Highland .
Thanks for that Diamond- is it easier to use a 4mm float or is 6mm ok.? I find the thicker the adhesive the more the mosaic slips?
 

Reply to a mosaic swimming pool film in the Australia Tiling Forum area at TilersForums.com

Make sure to mark a post as a solution for better transparency.

There are similar tiling threads here

  • Question
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper. A plumber/builder fixed...
Replies
1
Views
804
    • Like
  • Sticky
  • Question
Water Damaged Shower Repairs Shower tile repair – water damage – tile waterproofing Do you have shower leakage that goes downstairs leading to either your main floor or basement? Read this blog...
Replies
0
Views
2K
  • Question
Hi all, I've laid some Arditex NA over the kitchen floor area (not under cabinets. The area is 4.5m x 1.8m. The top third of the room is totally level. The remainder of the room has a slope...
Replies
3
Views
1K
Hello there, Relatively recently we had a new en-suite fitted (complete rip out of the old fittings, and old wall tiles and floor carpet). This consisted of a quadrant shower enclosure, a...
Replies
5
Views
2K
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

Birthdays

Top