Tilemaster Tilemaster Grout 3000

[Waluigi]

Hi Everyone.

Quick question- grout 3000, is it able to be used on a wall easily enough or is it not fine enough on a 2mm grout joint.

I have a free bag I need to use but don’t want anything too annoying to use.

 

[Flintstone]

Oh we don't like anything too annoying on here. Its great to apply to walls and floors to average joint sizes

 

[Waluigi]

Perfect thanks, I’ll use this bag up then.

 

[Andy Allen]

It's excellent for walls especially porcelain

 

[Flintstone]

Just make sure you have a few hours spare to wait for it to firm up before washing!

 

[GoneGuy]

I find it dries my hands out a lot

 

[Boggs]

It’s good grout, much better price than Bal MM2 also.

 

[Blunt Tool]

I find it dries my hands out a lot

You should use disposable latex gloves as you will end up getting dermatitis Adey

 

[hmtiling]

It's good for ceramic or large areas of porcelain

 

[Flintstone]

Always gloves when grouting

 

[Waluigi]

This is on Ceramic Gents. Thanks for the replies.

 

[Dumbo]

Hi Everyone.

Quick question- grout 3000, is it able to be used on a wall easily enough or is it not fine enough on a 2mm grout joint.

I have a free bag I need to use but don’t want anything too annoying to use.

Need to use ? Are you sure tight *** or want to use .

 

[Waluigi]

I got it free so want to use it just to see what it’s like

 

[Time's Ran Out]

Hope 1 bag is enough or you might have to go and buy another!

 

[Wishiwasatoptiler]

Just make sure you have a few hours spare to wait for it to firm up before washing!

Only used it once, supplied by customer, thought it was a nice grout to use, even colouring etc, but how long to dry.........................

 

[Andy Allen]

I find it sets quick on ceramics, bit longer on pors, but never seen it as an issue...
More time for a power nap....

 

[Waluigi]

Found it sets quite slowly still on ceramics. Nice grout though. Very easy to use.

One problem with the Grout 3000 in white. It’s not white.

If you’ve not used it before- imagine mixing up, but instead of using fresh clean cold water, you use p1ss. That gives you an idea of how yellow it is.

 

[Andy Allen]

That's why I never use the white.....bal white grout for me....
But you never said what colour you were using.......so I blame you....

 

[Waluigi]

Yeah I would use the grout again but not the white.

I doubt I’d use it on a floor though, takes too long to set on a floor. Prefer the Kerakoll now. Great stuff.

Anyway, to summarise, I like Grout 3000. Just not the white.

 

[Waluigi]

That's why I never use the white.....bal white grout for me....
But you never said what colour you were using.......so I blame you....

I very nearly nipped to Topps to pick up a bag of Microflex from one of their rip off local branches but decided to show my customer the grout before hand and they agreed that it would be fine. I did show them the powder so hopefully this stuff lightens up a bit

 

[Waluigi]

This gives an indication of the colour.

 

[Waluigi]

The grout does dry much whiter. Still not all that white.

I think it’s a definite for using the grout again though, just not in white.

 

[peteablard]

I'm sure someone on here once said they did something ridiculous like 60+ M2 of stone with this stuff, grouted the whole lot then washed if off no problem!

 

[hmtiling]

I'm sure someone on here once said they did something ridiculous like 60+ M2 of stone with this stuff, grouted the whole lot then washed if off no problem!

Entirely possible

 

[Waluigi]

I bought some light grey for my current job so we’ll see how it goes on porcelain.