Search the forum,

Discuss Where Can I Get An Ardex Grout Sampler From? in the Tile Adhesive / Grout Advice area at TilersForums.com.

Hi, I am a tiler in kent and just wondered if anyone knew where I could get hold of an Ardex grout colour sample tray. The one with all the little sticks with the different colours. I will try and post a picture here if that helps.
Ardex.jpg
 
J

J Sid

It just up the road for you!
Usually 7-10 days for out in the sticks and the customer only makes up their mind when the tiles are on the wall.
But agree exceptional grouts.
yes could pick it up from the factory if needed :)
convinced my CTD to stock it about a year or so ago, best thing they did. Don't sell much Weber or Mapei now.
Just trying to get the colour match silicon stocked next.
I do mark the ends of the colour sticks to show which grouts are stock items and which will be a wait. Never had anyone pick a colour and have to wait, yet :)
 

Reply to Where Can I Get An Ardex Grout Sampler From? in the Tile Adhesive / Grout Advice area at TilersForums.com

There are similar tiling threads here

  • Question
I've got an AKW Tuff form shower tray with a waste that is 10mm above the tray when fully screwed in. The Tiler laid my 5mm hex mosaic tiles on a 2mm bed, so obvs wasn't going to drain. I took...
Replies
6
Views
2K
    • Like
  • Question
Hi, I am planning on tiling my concrete garage floor with porcelain tiles. The concrete was laid down several years ago by a previous owner, and it looks like it was also polished and sealed -...
Replies
2
Views
1K
    • Like
https://www.tilersforums.com/threads/shower-bath-tiling-preparation-plaster-and-wooden-windowsill.83462/#gsc.tab=0 There was some heated argument in the above thread! I don't have much...
Replies
1
Views
290
  • Question
Hi all, I've laid some Arditex NA over the kitchen floor area (not under cabinets. The area is 4.5m x 1.8m. The top third of the room is totally level. The remainder of the room has a slope...
Replies
3
Views
1K
  • Question
Hi, I'm new to the forum and fairly new to tiling, my only previous "proper" job was my recent bathroom (600x600 porcelain, about 25m walls and floors) which went pretty well. I'm now having a go...
Replies
3
Views
2K
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

Top