Tidying up cut edges

[serval]

Is there a technique and a tool that you guys recommended that can be used to smooth out any imperfections and finish the cut edge of a tile so it has a nice bevel.

I normally hide cut egdes by butting them up to each other or the wall but there are a couple that i wont be able hide on my current project.
Cheers

 

[serval]

Was thinking of something like This for ceramic tiles.

 

[Old Mod]

Most of us would use s diamond hand pad, either a 100 or 200# grit.
Something like this.....

Widely available from tiling tool stockists.

 

[Tony_C]

As @3_fall says, i got some pads from a stone works on ebay quite reasonably priced and they have done the job. I have a file also for cleaning/squaring edge up that i can't get a pad in to 👍

 

[serval]

Nice one guys thanks. I'll find some of these and give them a go

 

[J Sid]

I get them for here ATS Diamond Tools | Diamond Hand Polishing Pads - https://www.atsdiamondtools.co.uk/product/diamond-hand-polishing-pads/

Other suppliers available

 

[GoneGuy]

As above hand diamond pads, you can also get pads for a grinder

 

[Dougs Third Go]

I still use a whetstone,,