Setting out brick bond from natural centre point causes thin cuts

[SlippySlipster]

Thanks for your advice,

I have made the alteration to the plan and have the below two layouts although moving to the centre line 50mm has given me the desired 3/4 1/4 bond which is great, because it has moved the centre away from where the focal point of the room is i prefer the way the 3mm with the slight gaps looks.

3/4 1/4 off centre



3mm Grout centered left 12mm gap and right 8mm gap



Can you please advise me of how i can fill the gaps to make them look correct.

Would it be a case of just doing very thin cuts and wrapping the rest of the tile round on to the next wall?

 

[IHB]

The 1/4 3/4 bond would look better if you removed your now off centre, centre line. I think it's the line that's drawing the eye and making it look wrong.