Im tiling small planks over a chipboard floor. My plan is Hardiebackerboard bedded on cement and screwed, followed by the heating mat and then flexible levelling compound. I will use a white,. s2 adhesive with the porcvelain tiles. Would any of you add a thermal 6mm sheet on top of the Hardiebackerboard?
- Thread starter Etherglide
- Start date
- Replies 2
- Views 2K
-
- Tags
- floor floor tiling tiling
- Copy link Copy link
Search the forum,
Discuss Hi guys, Floor tiling question. in the America Tile Forum area at TilersForums.com.
Thank you David. I didn't want to overspec.
Reply to Hi guys, Floor tiling question. in the America Tile Forum area at TilersForums.com
There are similar tiling threads here
-
- Question
Hi,
Can't seem to find a solid answer as I realise so much depends on multiple factors.
I'm planning to tile my kitchen floor with 8mm porcelain floor tiles (660x440mm).
My kitchen floor is...
- Scott9
- America Tile Forum
- 0
- 2K
-
- Question
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for tiling.I have removed the floor boards and plan to lay 18mm WBP plywood.The question is, what...
- Spinny
- UK Tiling Forum
- 1
- 621
- Question
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper.
A plumber/builder fixed...
- Dawz84
- UK Tiling Forum
- 1
- 804
-
- Question
Hi, I am planning on tiling my concrete garage floor with porcelain tiles. The concrete was laid down several years ago by a previous owner, and it looks like it was also polished and sealed -...
- dgmtiles
- Tile Adhesive / Grout Advice
- 2
- 1K
- Question
Hi all,
I've laid some Arditex NA over the kitchen floor area (not under cabinets. The area is 4.5m x 1.8m.
The top third of the room is totally level. The remainder of the room has a slope...
- redchair
- DIY Tiling Forum
- 3
- 1K
