I need to tile 2nd floor bathrooms in new builds. The existing floor is vinyl over the subfloor of 22 mil TG4 Caberdec Chip Board. Can I rip up the vinyl and tile directly over the chip board, or should I lay down hardibacker or other material first. If yes, what thickness would you recommend.
- Thread starter beemerdude99
- Start date
- Replies 2
- Views 2K
- Copy link Copy link
Search the forum,
Discuss Floor Tiling over 22mil TG4 Peel Clean Caberdec Chip Board in the Canada Tile Advice area at TilersForums.com.
Reply to Floor Tiling over 22mil TG4 Peel Clean Caberdec Chip Board in the Canada Tile Advice area at TilersForums.com
There are similar tiling threads here
- Question
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper.
A plumber/builder fixed...
- Dawz84
- UK Tiling Forum
- 1
- 804
- Question
Hi!
I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in preparation for tiling. A couple of days after there's a lot of very fine cracks which have appeared, you...
- po-tay-toes
- UK Tiling Forum
- 5
- 791
-
- Question
Hi,
Can't seem to find a solid answer as I realise so much depends on multiple factors.
I'm planning to tile my kitchen floor with 8mm porcelain floor tiles (660x440mm).
My kitchen floor is...
- Scott9
- America Tile Forum
- 0
- 2K
-
- Question
Hi, I am planning on tiling my concrete garage floor with porcelain tiles. The concrete was laid down several years ago by a previous owner, and it looks like it was also polished and sealed -...
- dgmtiles
- Tile Adhesive / Grout Advice
- 2
- 1K
