Preparation dried adhesive on ply
- Thread starter MTiler
- Start date
- Replies 30
- Views 7K
-
- Tags
- adhesive ply tile adhesive
- Copy link Copy link
Search the forum,
Discuss dried adhesive on ply in the Tile Adhesive / Grout Advice area at TilersForums.com.
Reply to dried adhesive on ply in the Tile Adhesive / Grout Advice area at TilersForums.com
Make sure to mark a post as a solution for better transparency.
There are similar tiling threads here
- Question
I've got an AKW Tuff form shower tray with a waste that is 10mm above the tray when fully screwed in. The Tiler laid my 5mm hex mosaic tiles on a 2mm bed, so obvs wasn't going to drain.
I took...
- Mike Zeidler
- Tile Adhesive / Grout Advice
- 6
- 2K
Porcelain
SLC over old tile adhesive
Further to my other post re our hollow tiles issue It looks like our tiler has dot and dabbed most of our floor to accommodate tiling 800x800 porcelain over an uneven floor.
The gap from defrac...
- Steve_Bcs
- Tiling on Underfloor Heating
- 6
- 2K
https://www.tilersforums.com/threads/shower-bath-tiling-preparation-plaster-and-wooden-windowsill.83462/#gsc.tab=0
There was some heated argument in the above thread! I don't have much...
- bureaucrazy
- Tanking and Wetrooms
- 1
- 280
