- Thread starter JON HUME
- Start date
- Replies 4
- Views 5K
- Copy link Copy link
Search the forum,
Discuss Advise on adhesive and grout for a commercial steam room please in the Tile Adhesive / Grout Advice area at TilersForums.com.
Reply to Advise on adhesive and grout for a commercial steam room please in the Tile Adhesive / Grout Advice area at TilersForums.com
Make sure to mark a post as a solution for better transparency.
There are similar tiling threads here
- Question
Hi all,
I am planning to tile a full height panel of split face tiles to sit 3” behind a log burner on a plaster render on blockwork wall.
I’m planning to score and scrape the paint off the...
- Clive99
- DIY Tiling Forum
- 5
- 1K
- Question
Hi all,
I've laid some Arditex NA over the kitchen floor area (not under cabinets. The area is 4.5m x 1.8m.
The top third of the room is totally level. The remainder of the room has a slope...
- redchair
- DIY Tiling Forum
- 3
- 1K
- Question
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper.
A plumber/builder fixed...
- Dawz84
- UK Tiling Forum
- 1
- 804
-
- Sticky
- Question
Water Damaged Shower Repairs
Shower tile repair – water damage – tile waterproofing
Do you have shower leakage that goes downstairs leading to either your main floor or basement? Read this blog...
- Tile Marble Granite
- America Tile Forum
- 0
- 2K
- Question
Hi, I'm new to the forum and fairly new to tiling, my only previous "proper" job was my recent bathroom (600x600 porcelain, about 25m walls and floors) which went pretty well.
I'm now having a go...
- cdbe11
- DIY Tiling Forum
- 3
- 2K
