Questions and tiling advice in the Tiling on Underfloor Heating - Tiling on Underfloor Heating. Whether Electric Under-floor Heating Systems, or Water (Wet) Under Floor Heat Systems. Radiant heating installation advice. Design layout and CAD for under floor heating systems. Hot water systems..
Search the forum,
Normal Threads
I have a customer who lives in a 200 year old property. The lounge floor he wants tiled which is very thick concrete. He wants electric underfloor heating but I'm concerned he'll lose too much...
- Teign Tiler
- 1
- 187
Hi,
I was just wondering if anyone knew roughly the cost of running electric underfloor heating? I am aware that different systems will be slightly different but just a general estimate from...
- Chris_32
- 29
- 23K
Hi fellow forum dwellers, am a distraught customer looking for some advice.
We did an extension and got water pipe UFH installed throughout the ground floor close to 100sqm. The WFH was left to...
- procastinator
- 45
- 10K
Hi all,
Having been doing a lot of reading but have come for some advice if at all possible, please.
We had a major flood on the downstairs of our home and to cut a long story short, under the...
- Mr Andrew Grogan
- 27
- 7K
Hi All,
Need an advice with regards to underfloor heating and which brand to go for...
Need about 7m2 200w for my conservatory, 6m2 150w for kitchen and around 2m2 150w for bathroom.
There is...
- Alzak
- 27
- 15K
Anyone used it ?
DCM - PRO System | Heated Floor Mat | Warmup - http://www.warmup.co.uk/underfloor-heating/electric/dcm-pro-system
There's a video on there, that self adhesive mat... really ?
- Flintstone
- 28
- 18K
Not really the right forum but has anybody fitted vario pro to walls .
I fixed up membrane today and going to cable tomorrow .
- Dumbo
- 28
- 7K
Hi, i wonder if anyone has had issues with underfloor heating escaping from area by kickboards, where the tile is cut to feet of units?
Thanks in advance
- Paul2468
- 29
- 5K
Been asked to tile a floor, 20m over a sand and cement screed that's literally not been laid yet and they don't want to wait for 100+ days
Has anyone used vario pro over a screed in this...
- Flintstone
- 31
- 12K
Hi
I am in the process of fitting a new En suite out and have recently bought a 2m2 heat mat with digital timer. So far I have chased through the walls, ran the electric feed to a fused spur (3A...
- 1animal1
- 31
- 14K
Hi Guys, in my current bathroom job its been a late decision to have an electric underfloor heating mat.
Its 18mm chipboard well screwed down and I've bought, cut and laid 6mm Hardiebacker but...
- Bathfix Bob
- 32
- 21K
Hi All,
I'm finishing an extension off next week by installing a UFL heating system,I've done a few before but not for a while.
I'm happy with everything,but I'd just like to ask peoples thoughts...
- Kevin09
- 33
- 10K
Hi all, I'm hoping you can advise me on a few things.
We have recently had underfloor heating installed. All was going well however whilst the builder was fitting the system, I noticed that he...
- Dipesh
- 34
- 14K
Hi All,
I'm new on here, just started advertising to do Tiling and quickly found myself in deep water. I'm a Carpenter/Joiner by trade, so over the years iv done tones of Kitchens and Bathrooms...
- DriftFactory
- 35
- 8K
I have a problem developing with tiles laid over water UFH in anhydrite screed. A few tiles are sounding hollow and are slowly becoming loose. The floor was 'scarified' using an orbital floor...
- Element
- 43
- 19K
Hello,
I’m new to tiling and to forums so my apologies for both if there are any etiquette failures!
I’ve scoured the internet and can’t find any tangible advice on tiling on over overfloor...
- Shinyshiny054
- 50
- 33K
12m2 conservatory floor so ideally 11m2 mat.
Would you bother with 2 mats or do you think 10m2 mat opened up a bit would suffice?
Trav tiles so should heat up nicely.
- macten
- 59
- 15K
Reading a previous thread I feel that there is hope for my situation. The names listed below are from contributors of the old thread, that is the only reason they are mentioned. Thank you...
Hi everyone,
With a kitchen renovation, Mrs choose the white mirror quartz floor tiles from a local supplier.
We then opted to have a wet UFH system installed into the existing concrete floor...
- ulldins
- 4
- 506
Hi
I have ordered the Wunda Rapid Response underfloor heating for my kitchen.
We were going to have LVT flooring before but have now decided to have porcelain tiles.
I have looked at the...
- Mtile89
- 9
- 2K
We had a water underfloor heating installed and tiled over. 3 months later we noticed many tiles sound hollow. We worry this can signal future problems.
More details on our floor:
water...
- Patricia Filipe
- 7
- 2K
Good afternoon,
Does anyone have experience of using grooved dry screed boards? (Bonus points if on suspended floor)
There seems to be a few brands/products about (ThermRite, Profix, ProWarm)...
- guediver
- 1
- 876
Hi All, I'm new to the forum and not in the trade, so please excuse my ignorance.
I'm looking to install wet underfloor heating using polypipe overlay plus system (18mm) and then looking to...
- PleaseHelp
- 1
- 3K
Hi all.
I came across this forum searching for info so my first post.
I'm renovating 1890's Victorian house with suspended floors. Joists are traditional 16" centres.
I want to install wet UFH...
- xxredmaxx
- 1
- 1K
Further to my other post re our hollow tiles issue It looks like our tiler has dot and dabbed most of our floor to accommodate tiling 800x800 porcelain over an uneven floor.
The gap from defrac...
- Steve_Bcs
- 6
- 2K
Hi All
I am after some advice please. We have a retrofit undefloor heating system ( Robbens Profilow 15) which was laid on a rather uneven floor. We had 4 rooms knocked into a large kitchen...
- Steve_Bcs
- 8
- 3K
I am sure someone will know a good practice solution. We started a wetroom last year and then fracture my wrist badly so it's been left in a state of limbo. We have removed the temporary fixed...
- NeatOne
- 1
- 2K
Hi,
I am trying to achieve a low floor build up including wet UFH over a new suspended timber floor in our barn conversion. The area is large, 21m x 8m. Having spoken to various UFH suppliers I...
- Captain Scally
- 3
- 2K
We are currently at the planning stage for a floor with bifold windows and wet underfloor heating.
Basically the tiles near the windows will need to go over the screed and onto a concrete block...
- Sprotty
- 0
- 1K
I'm about to start on an upstairs wetroom. There will be wet underfloor heating going in via spreader plates. The former will be a 22mm maxxus. Current joists are 7" at ~420 centres. 3x3m room...
- themorg
- 1
- 1K
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.
