My kitchen units on the right hand side hang 1/2 inch lower than the left side. I will have 5 rows of 200x100 tiles to make a brick effect. I was told to divide the half inch by the number of rows of tiles which will be 0.1 inch on each row? I am wanting to know how this will effect me using the 4mm spacers as they won’t be doing the job they should so do I just put them on the sides and leave off the bottom and top? Many thanks.
- Thread starter Jonny Donald
- Start date
- Replies 1
- Views 885
- canada help kitchen tiling wall wall tiling
Search the forum,
Discuss Kitchen Wall Tiling Help in the Canada Tile Advice area at TilersForums.com.
angrypirate
TF
Raise or lower your kitchen units 
.
You've only got 12mm to adjust which could be achieved by splitting the difference on the left and the right?
.You've only got 12mm to adjust which could be achieved by splitting the difference on the left and the right?
Reply to Kitchen Wall Tiling Help in the Canada Tile Advice area at TilersForums.com
There are similar tiling threads here
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
The trustpilot reviews for tilers-world are excellent, but there's not a huge number of them...
Hi!
I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Advertisement
Share This Page
New Tiling Questions
-
UK Question about tile sizesI have moved into a new house and want to tile the downstairs bathroom walls. Its not a big room but my wife likes the idea of a feature wall tile and then a grey / white tile on the other 3...
- Started by supersolid2
- Replies: 1
-
Another First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon | From Tilers Forums .co.ukAnother First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon It appears the other UK Tiling Forum is using a Free WordPress (that’s fine) but they went for wpForo instead of bridging...- Started by Dan
- Replies: 0
-
USA Verde Alpi marble tiles 12 x 12I'm searching for 42 pieces of 12" x 12" Verde Alpi marble tiles. Preferably honed. 12" x 24" could work also. I am in San Diego, CA, USA, so would need packaging and shipment if not local. here...
- Started by EAC
- Replies: 0
-
Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers?Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers? I'll tell you a funny story about how I got a job with Topps Tiles Newcastle and got top sales...
- Started by Dan
- Replies: 2
-
Hey all not the real Bob Marley here Im afraidNice forum you have here. Seems very helpful. I have some work coming up soon so will post in the more relevant forum. I hope your businesses are flourishing! Be well
- Started by Bob Marley
- Replies: 1
Replies you've not seen
-
Preparation Floor prep after flood131 views and not a single response! Well this forum has changed! Lol. Where's all the old boys gone!? Lol. I have my answers now anyway. 👍🏻- Latest: AliGage
-
New Good Morning Thread 2024All done now, was just the linkage could'nt get it into gear so not as bad as first thought. still a p##s off though- Latest: bsc ceramics
-
Job in Colchester, maybe leading to moreHi andy could you give me a call my name is noel and i am a professional bathroom tiler wih over 15 years experience tiling bathrooms,ensuites etc...
- Latest: noel brown
-
UK Question about tile sizesMatching grout lines isn’t an issue with different sized tiles . On the feature wall centralise left to right and top to bottom. Creates a better...
- Latest: Dave
-
Underfloor Running CostsBased on your room it's around 2.6kw per hour assuming its running permanently. Your heat loss needs to be calculated so you can find out how much...
- Latest: Ajax123