Can adhesive colour bleed to stain tiles or grout?

[Raccus]

If using grey adhesive, can that dark colour bleed into grout or stain pale tiles from below?

I have come across mention of it on here, but seemed a nebulous concept. Tried to search about and its not clear. It seems to be the case that adhesive dark colour can come through on pale tiles or grout in some cases. But cant work out if its dependent on the adhesive, the tile, on the added effect of damp or what.

Tiling with white 60x30 porcelains on wall and pale grey on floor. Mapei adhesive and grout. Floor grouting with pale grey and walls white.
White adhesive is obviously what should be used ordinarily but client somehow provided a bag a grey amongst the white lot.

Only noticed the colour once i opened it, so questions is, can it be used and work tidy making sure grout joints are clear, or avoid?

 

[Flintstone]

Only important on stone or if you leave loads in the joints where I could be seen after grouting. If you grout when the adhesive is still drying, the moisture can come through and leave Salts on the surface of the grout but this is the same with any colour adhesive

 

[Time's Ran Out]

Grey adhesive will not stain a porcelain tile from the back. Check the 60x30 tiles are porcelain.

 

[Raccus]

ok, thank you both

 

[davidd]

i want to install light color (earth tone) subway tiles (backslash.) When i put the sample tile against the wall with a painted surface (almost the same tone as the tile) the tile almost appears too light in color. My question is..will i get a darker look from my tile if my adhesive is darker in color which is the look im going for. Sorry for any confusion in my question Also..can i add color to my adhesive.

 

[Raccus]

others have more or less answered this above- adhesive will have no affect on tile colour, but could affect stone. Adhesive colour could bleed into grout if not properly dry or if grout covering very thinn due to adhesive not well cleaned from joints.

Possibly you may consider using a dark colour grout (grout not adhesive) to darken the over all look?

 

[CathyA]

I have had cream porcelain tiles laid over underfloor heating and am getting dark staining appearing on many of the tiles which is coming from underneath. I can only assume it is the dark grey adhesive that was used on installation. It is not possible to remove the marks as they are below the glazing on the tiles.

 

[Dave]

I have had cream porcelain tiles laid over underfloor heating and am getting dark staining appearing on many of the tiles which is coming from underneath. I can only assume it is the dark grey adhesive that was used on installation. It is not possible to remove the marks as they are below the glazing on the tiles.

Can you post pics please

 

[tobankeisha]

unfortunately yes, I had such a sad routine work time case with a gray grout, I advise you to use another.

 

[tobankeisha]

unfortunately yes, I had such a sad routine work time case with a gray grout, I advise you to use another.