recommend

Got a small walk in shower to rip out and re tile and was curious to know if there would be advantages to using a cement hardie type board instead of moisture resistant plaster board? I'm assuming both would require tanking, weight/type of tiles to be used currently unknown.

I recommend everyone on this forum because they they give fantastic advice. I appreciate all the feedback I have received from the members on this forum and would like to thank everyone involved in helping me fix the problem I have had. My names Bob, Bob Charley, and find it rewarding to know...

I'll need one for cutting lengthways (44") down a some monster porcelanosa tiles so I thought with a decent cutting disk and some assistance I'd be able to follow a line. Any recommendations as I don't want to end up buying crap.

Needing some new blades for a small 240v wet saw. Have 4 shower areas and large kitchen floor and hall to do and some porcelain tiles to cut.

I'm looking to buy a 110v SDS drill for drilling and striping tiles of walls/floors and just wondering what you would recommend. I'm looking to spend between £200-£300. Maybe a mikita or dewalt but what model would be best.

Hi guys For years now I've been using Marcrist CK850 in my 125mm grinder and I also have a 250mm one in my Rubi table saw. I don't know why but the last few blades I have purchased don't seem to be up to scratch, one even split while cutting a tile and near took my head off, that was kindly...

Hi Guys I'm in the process of trying to price up my new bathroom, and i'll be having all of the walls completely tiled in white tiles with grey grout, with a grey vinyl floor. There may be a grey feature round the center of the wall, I haven't yet decided. average size of tiles I guess, not...

Just got a price of 20kg bags of Larsen flexible standard set for £7.00 + , a bag ,can you beat this ? :smilewinkgrin: what is this addy like anyone use it thanks Dave........:thumbsup:

Hi, I'm after a manual cutter that cuts 600 by 400 Porcelain like butter! (Price not a problem) I have just purchased a rubi ts 70 thinking it would be ok, but it struggles with the easiest of cuts and the breaker doesn't have the strength to beak the whole length of the tile,600mm. It cuts the...

Looking for a laser level that is accurate with a good beam and does both vertical and horizontal lines and that comes with a tripod, looking to spend over £100 but under £200. Any recommendations ? :smilewinkgrin:

Hello, I'm working on the bathroom floor and need advice on choosing a cutter to make diagonal cuts. I have fitted a 1200 x 1200 Marmox showerlay former with offset drain & I need to make the diagonal cuts in my tiles to align with the slopes of the tray. The tiles are 60cm x 30cm - the diagonal...

Can someone please recommend a tile sucker as the cheap one I have is useless.

I have wet table saw which is able to do mitre cut up to 45°. I cut wall ceramic tilles with blade which was supplied with saw. There was not a lot chipping on edges but problem arised when cutting floor tiles. There is lot of chippings especially when cutting in angle. Can you recommend me good...

Hi everyone and thanks for listening to my first post. I joined this group a while back so that i could pick up tips on laying travertine and I found much useful info here and went ahead and was very pleased with the result. I am now in a period of forced retirement (at the ripe old age of 54)...

Hi, I'm New to the forum, been tiling now for 5 years after doing a course at PITT. I've just returned back to work after breaking my foot before christmas, doing some saturday night tiling! I've had a bad result with SealGuard inpregnator sealer on a 30m2 tumbled marble floor, its left the...

I'm looking for a thick bed adhesive. I'm laying large format limestone (800x500) onto a heated screed (with ditra). I was planning on using a 20mm square notch trowel so wanted a thick bed adhesive. I've looked at the BAL one, but to use it on UFH it requires admix aswell which will bump the...

Hello everyone I'm on the verge buying another new wet cutter wheel for my rubi nd 180 I usually use the marcrist wheels but they do tend to chip the tiles which is obviously not good when going round windows. I bought 2 of these last year which isn't bad I suppose as they have seen a lot of...

I was looking to tile the area inbetween my worktop and kitchen units. It was plastered around a year ago and at the time had mist coats applied before a final coat of Dulux Soft Sheen - can this be tiled on top of as the upstand doesnt really allow for the extra depth backer boards would need...

Hi all. I'm in the process of renovating a house and we're approaching the stage of tiling now. I have never done it before in my life but I am a keen DIYer so I plan to give it a go myself. My question is what brand and type of tile and grout would you recommend to tile a bathroom (including...

hi all im looking to see if anyone can recommend a good laser distance measure thanks ppl