Free National Wet Room Seminars

[Nicobond]

We're holding free Nicobond National Wet Room Seminars. The dates are below:

Cardiff - 28th March
Stone, Staffordshire - 4th April|
Glasgow - 11th April
Plymouth - 9th May
Southampton - 17th May

Sign up here:
N&C National Wet Room Seminar Roadshow 2019 - https://mailchi.mp/nichollsandclarke/wetroom-roadshow

 

[Qwerty]

Looks good! I will enrol on the Southampton one later

 

[Nicobond]

That's great!
Let us know what you think of the seminar once you've attended

 

[Flintstone]

Thanks for sharing, just had a look at the video. PVA the timber was mentioned?

 

[GoneGuy]

Was pva mentioned as plastic ply was being used??

 

[Nicobond]

Thanks for sharing, just had a look at the video. PVA the timber was mentioned?

Thanks for commenting.

Although plastic ply is a stand alone system, it also forms part of the N&C wet room system when installed on a timber floor.

I’ve attached a copy of our method statement. UBAS dilution is 1:4. Hope this helps

 

[Nicobond]

Was pva mentioned as plastic ply was being used??

Our Nicobond Technical Wet Room Trainer, Shaun was answering an attendee but the video may be a little out of context so we’ll edit that part so not to cause any confusion. We recommend UBAS. Shaun mentioned to our attendee that primer was also fine.

The glue on the plastic ply will increase in bond strength the longer it is stuck down. It does not need the PVA to do this.

The UBAS is purely there to catch any loose fines and particles that may hamper the full bond of the plastic ply to the timber. I hope that helps?

 

[Cranbrook]

I'm in Prague for a stag do from tomorrow so I'm gutted I can't make the Cardiff one!

 

[Andyman]

Ok I'm in for the Cardiff one tomorrow

 

[GoneGuy]

Ok I'm in for the Cardiff one tomorrow

See you there